Professional metal crusher lays the foundation for future development

The external force exerted on the solid during the crushing process of the metal crusher includes four kinds: pressing, shearing, impact, and grinding. Rolling and rolling are mainly used for coarse and medium smashing. They are suitable for the crushing of hard materials and large blocks. The shears are mainly used for crushing and are suitable for the crushing of tough materials. The impacts are mainly used for smashing, fine grinding and ultra-fine grinding. The friability of brittle materials; grinding mainly in fine grinding, ultra-fine grinding, suitable for the smashing of small pieces and fine particles. The actual crushing process is often the simultaneous action of several external forces. When the coal gangue pulverizer is working, driven by the motor, the two sets of rotors connected in series are simultaneously rotated at a high speed, and the material is rapidly broken by the upper rotor in the internal cavity of the machine. The hammer of the rotating lower rotor was again finely crushed, and the materials in the cavity collided with each other in a swift manner and crushed each other to achieve the effect of hammer powder and material powder. The cinder particles with a particle size of less than 3 mm were formed. This particle size can fully meet the requirements of brick and tile manufacturers as internal combustion bricks. Our main products: coal gangue pulverizer coal gangue crusher metal crusher desulphurization gypsum pressure ball machine traditional crusher with crucible sieve plate, not suitable for raw materials with high moisture content, when the raw material moisture content is high, it is easy to seriously Blockage, so that the hammer can not rotate, the material can not be discharged, or even burn out the motor, seriously affecting production. On the other hand, Ono's coal gangue crusher does not have a screen bottom, and there is no strict requirement on the moisture content of the material. There is no problem of blocking the screen plate, and there is no problem that the fine powder cannot be discharged in time, and crushing is repeated. High, there is no invalid hammer wear phenomenon. Solve the problem of high-humidity material crushing. The desulphurization gypsum pressure ball machine is made of pressed material after pressing ball machine, which is energy-saving and environment-friendly, easy to transport, improves the utilization rate of waste, and has good economic and social benefits. The desulfurized gypsum with high moisture content can be pressed into a ball at one time without adding any binder, the purity can be guaranteed, and the shape can be directly formed without subsequent drying process, which is more conducive to the convergence and transformation of existing processes. High ball strength, suitable for all kinds of transportation, reducing packaging costs, improving product transportation capacity; After forming desulfurized gypsum into and out of the mill, no sticky grinding, affecting the output of the mill, etc.; desulfurization gypsum pressure ball machine compact , Easy maintenance, simple operation, short process flow, low energy consumption, low failure rate, the use of high quality alloy steel material (patented) in the main roll part has greatly improved the wear resistance and pressure resistance, so that the machine has a long service life . [Contact Us] Company Name: Henan Ono Machinery Sales Tel: 0371-69586777, 69586888 Business Mobile: 15138975000 Website