The root cause of mechanical deformation inside the pressure transmitter

The root cause of the internal mechanical deformation of the pressure transmitter For domestic pressure transmitters, we always follow the steps of others. In pursuit, this is the biggest problem in the field of transmitter technology. If we say that in these pressure transmitter instruments, because of the open bus, the technology gap is relatively small, then in the field of desktop instruments, the gap between domestic and foreign is almost impossible to estimate. When the domestic pressure transmitter is used, mechanical deformation may occur.

The tiny changes in the distance between the sensitive sensor's internal plate of the pressure transmitter can produce measurable voltage signal changes. The small mechanical deformation greatly reduces the hysteresis and non-repeatability of the sensor, and the speed of the sensor is also very high. improve. The pressure transmitter has a wide measuring range, it can accurately measure the pressure in the range of 25Pa ~ 70MPa, and has a very high stability. The minimum measuring range of the sensor of the high-precision differential pressure transmitter is 0-125Pa, the measurement accuracy can reach 0.073%FS, and the static pressure can be from vacuum to 1.7MPa. In the range of 0-65°C, the temperature effect is <±1.8% FS/100°C, and the overload capacity is up to 270 times that of FS.

Internally produced pressure transmitters sometimes exhibit internal mechanical deformation. This is something we should notice when working with the transmitter. This phenomenon is difficult to avoid when using the transmitter. However, we can reduce this phenomenon through usual daily maintenance.

4.0-5.0Ton Diesel Forklift

Goodsense forklift new generation diesel counter balance forklift advantages:

1.Strong Power System.GOODSENSE forklifts are all with reliable power accessories.All accessories like engine, gear box are support by domestic and world famous brand, high quality, reliable after-sales.We follow the strict environmental design,all engines match the China â…¢ or even higher emission standards.

2.Super comfortable.GOODSENSE forklifts are all with comfortable driving space,adjustable steering wheel and seats,super low and non-slip step,suspension steering axle,storing space,and convenient LCD panel.

3.High Security.Whole perspective mast and backrest, super good view,high strength overhead guard,high place security combination lamp,neutral security features,parking brake,fork lock function(optional),all for safety.

4.Smart designing suitable for working inside 20GP container.With KOREA brand KCC painting or Japan Nippon brand.

General
Model			FD40T	FD45	FD50
Power Type			Diesel	Diesel	Diesel
Load Capacity		kg	4000	4500	5000
Load centre		mm	500	500	500
Tyre
Tyre			Pneumatic Tyre	Pneumatic Tyre	Pneumatic Tyre
Front Tyre			250-15-16PR	300-15-18PR	300-15-18PR
Rear Tyre			6.50-10-10PR	7.00-12-12PR	7.00-12-12PR
Overall Dimension
Lift Height		mm	3000	3000	3000
Fork Size	L×W×T	mm	1070×125×50	1070×150×55	1070×150×55
Mast Tilt Angle	F/R	.	6/12	6/12	6/12
Mast Lowered Height		mm	2195	2330	2330
Mast Extended Height(with backrest)		mm	4180	4165	4165
Length to face of fork(Without fork)		mm	2890	3245	3245
Overall Width		mm	1410	1430	1430
Overhead Guard Height		mm	2120	2340	2340

Application Area:

1.Warehouse

2.Port

3.Factory

4.Distribution Center

5.Logistics

If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.

4.0-5.0Ton Diesel Forklift,4.0Ton Diesel Forklift,5.0Ton Diesel Forklift

ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.dieselforklift.nl