ISO/Ce Approved 800mm Width Gjt Mining Detector/ Cement/Limestone/Coal Metal Detector for Indonesia/Thailand/Myanmar

Introduction:
Series GJT  iron ore metal detector is the latest product in metal detecting field. In circuit design, this product adopts digital phase shifting and related detecting technologies, which are the latest metal detecting technologies. With stable performance, high detecting sensibility and strong disturbance resisting ability, series GJT metal detector is widely used for belt conveyors in thermal power, cement, paper, mining, forestry, environment protection, building materials and other industries.

Feature:
1. Its sensors shell is made of stainless steel or plastics steel, good anti corrosion ability ,  suitable for terrible environment and easy to install.
2. Control cabinet adopts dual-door structure with stainless steel shell , waterproof and dustproof.
3. Position and belt speed can be adjusted and the types of mineral can be selected, digit set , good stability and wide application.
4. Sensitivity can be adjusted intelligently.(The metal detector upon detecting the presence of metal, the conveyor belt becomes automatically stops.)
5. Multi-level anti-inference measures are taken to avoid wrong actions effectively.
6.General purpose and easy to upgrade.
7. Both magnetic and non-magnetic materials can be detected.

Technical Parameters:

FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.       
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.   
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price. 
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.  

 
Introduction:
Series GJT  iron ore metal detector is the latest product in metal detecting field. In circuit design, this product adopts digital phase shifting and related detecting technologies, which are the latest metal detecting technologies. With stable performance, high detecting sensibility and strong disturbance resisting ability, series GJT metal detector is widely used for belt conveyors in thermal power, cement, paper, mining, forestry, environment protection, building materials and other industries.

Feature:
1. Its sensors shell is made of stainless steel or plastics steel, good anti corrosion ability ,  suitable for terrible environment and easy to install.
2. Control cabinet adopts dual-door structure with stainless steel shell , waterproof and dustproof.
3. Position and belt speed can be adjusted and the types of mineral can be selected, digit set , good stability and wide application.
4. Sensitivity can be adjusted intelligently.(The metal detector upon detecting the presence of metal, the conveyor belt becomes automatically stops.)
5. Multi-level anti-inference measures are taken to avoid wrong actions effectively.
6.General purpose and easy to upgrade.
7. Both magnetic and non-magnetic materials can be detected.

Technical Parameters:

FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.       
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.   
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price. 
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.  

 

Paddle dryer

Paddle Dryer,Hollow Paddle Dryer,Rake Dryer,Sealed Rake Dryer

Wuxi Zhanghua Pharmaceutical Equipment Co. Ltd , https://www.wx-zhanghua.com