Door Frame Roll Forming Machine

• Model NO.: BU
• Forging Forming Method: Free Forging
• Feature: Automation
• Warranty: 12 Months
• Advantage: Easy to Maintenance
• Door Frame: Roll Forming Machine
• Transport Package: Complete Shipping Package
• Origin: Shandong Jinan

• Type: Rolling Machine
• Power Source: Electric
• Certification: CCC, ISO9001, CE
• Customized: Customized
• Condition: New
• Trademark: BU
• Specification: CE, ISO9001: 2000
• HS Code: 8455221000

 
Ø  MATERIAL:    
(1) Coil Width: according to final test data
(2) Suitable Coil Thickness: 0.8~1.2mm
(3) Suitable Raw Materials: cold rolled steel plate (yield strength: 235Mpa)
(4) suitable steel coil inner diameter: ¢508mm
(5) suitable steel coil outer diameter: ≤¢1300mm
(6) Suitable steel coil max weight: 3 Tons
 
Ø  MAIN TECHNIQUE DATA OF LINE:
(1)   Line working speed: 10~20m/min (according to different final profile length)
(2)   Each piece final products length tolerance: ±1.5mm
(3)   Roll forming line power source: 380V/50HZ/3 Phase
(4)   Air source requirement: >0.5Mpa
Ø  ROLL FORMING LINE WORKING PROCESS:
Decoiler-leveler-material loop-feeder-puncher-material loop-roll former-cuter-final products output


Ø  MACHINE COMPONENTS:
(1)   Hydraulic decoiler--1 set (decoiler capacity is 3 tons)   
(2)   Leveler mahcine-1 set
(3)   Material loop-2 sets
(4)   Servo feeding device-1 set
(5)   Puncher-1 set
(6)   Main roll former-- 1 set                        
(7) Hydraulic Cutter-- 1 set                               
(8) Hydraulic station-- 1set                           
(9) PLC control system - 1 set                           
(10) Final products rack-1set (total length is 4 meters)                       
 
LINE TECHNICAL SPECIFICATION OF EACH PART
(1)   Hydraulic decoiler:
Automatic model; motor power drives decoiler shaft to opens steel coil, and hydraulic power expands steel coil inner surface, in order to make steel coil to be fixed well on decoiler shaft. Decoiler also includes pneumatic power brake device.
The decoiler is single head model, max loading capacity: 3000kg
Max steel coil width: 400mm
Suitable steel coil inner-diameter: ¢508mm, max outer diameter: ¢1300mm

(2)   Leveler machine:
Leveler machine is 7 rollers model. It includes 2 guider rollers and 5 leveler rollers.
Leveler is driven by motor, and working speed can be adjusted.
Up layer leveler roller can be adjusted up and down, manual power adjusts the rollers' space.
Suitable material thickness: 0.8~1.2mm
Max steel coil width: 400mm
 
(3)   Material loop:
Complete line has two sets loop. One loop is between leveler and puncher, and the last one is between puncher and main roll former. Main aim of loops is to match different part working speed and make complete line to be worked continuously.
Main components of loop are few photoelectric control switches.
 
(4)   Servo feeding device:
Machine uses feeding shafts model, and this machine includes servo motor, a pair of feeding shaft, transmission device, guider and numerical control system. (Servo motor, measure accessories and numerical control system are all used import products.)
Suitable material thickness: 0.8~1.2mm
Max feeding steel coil width: 400mm
When servo feeder matches with puncher, the max working speed is 20m/min.
Feeding roller material: 9Cr2Mo (or GCr15), heat treatment, HRC55~60
Feeding length can be set freely, and operator can input 20 groups feeding data at same time.
Servo motor power: about 3Kw

(5)   Puncher:
The puncher is multi-station model; it is used to punch related holes on the section surface.
The holes distance which is on horizontal direction (steel coil width direction) can be adjusted accord to requirements. Whatever the adjustment, change and repair is very convenient.



Punched includes 4working units and a complete set punch die.
Puncher is driven by hydraulic power, working speed is fast and punch precision is high.
 
(6) Main roll former:
                 Main roll former uses single forming stand model, welded steel base plate.
            The max width of feeding guider: 300mm
Main roll former forming stand number: about 28
This roll former can produce two profiles at same machine, when profile standard is changed, operator only needs to change and adjust some forming rollers, and it will be ok.
The transmission system includes main motor, decelerator, transmission shaft and gear box.
All down forming layer shafts are power shaft, up layer shafts have not power. 
Each forming stand up and down forming rollers' space can be adjusted manually.
The roller is designed by professional software, and all rollers dimension are precise;
Forming roller material: Cr12
(Heat treatment, HRC58~62, it is equal as American D2)
(Roller surface is polishing treatment.)
Forming shaft material: 40Cr (heat treatment, HRC45)
Forming shaft dimension: ¢60mm
Forming stand material: QT470
Main roll former working speed: 10~20m/min
Main motor power: about 18.5Kw
Machine base plate is welded steel model, all working actions are control by electric cabinet.
 
(7) Flying Cutter:
The cutter model is flying cut; it is continuous cut style;
There is no waste piece after cut actions.
Cutter tool material: Cr12 (heat treatment, HRC58~62)
Cutter is driven by servo motor; cutter base plate is installed on lead rail.
Cut length tolerance ±1.5mm
The cutter can be cutted the final products on confirmed length, and the length is automatically fixed by coder. 
 
(8) Hydraulic station:
   It supplies the power for the hydraulic decoiler, puncher and cutter.
   Electromagnetic valve uses Italian "ATOS" brand products, and the others hydraulic accessories use Chinese famous brand products.
   Main components of hydraulic station are oil pump, motor, hydraulic valve, pressure meter, filter, accumulator and etc.
   Hydraulic oil standard: 46# hydraulic oil
   Hydraulic oil cleanliness should keep grade 6~8.
   Hydraulic motor power: about 4Kw
 
(9) PLC Control System:
This system uses Mitsubishi (or same level brand products) PLC to control all working actions. Production quantity and each piece length will be automatically measured; human and machine interface, touch screen is input and cancelled the working data. It is convenient to control the roll forming machine.
The control panel has English operation interface, it is convenient to operator to input and cancel working date.
   Main electrical accessories show:
   PLC: MITSUBISHI (or same level products)
   Inverter: Delta (China Taiwan products)
   Coder: OMRON
 
(10) Product Rack (un-powered):
Two parts, each part length is 2 meters. The total length is 4 meters.
In order to collect the final product and final products is convenient to be stacked by workers.
This rack can be disassembled easily, in order to satisfy different working condition requirements.








 

Dog Food Machine

Product categories of Dog Food Machine, the line produce variety shapes Pet snacks, different shapes are made by adjusting the dies from extruder

we are specialized manufacturers with 15 years of extruder experience, we have the perfect after-sales service and technical support. Look forward to your cooperation!

Dog Food Making Machine,Dog Food Production Line, Dog Feed Machine

Jinan Chenyang Technology Co., Ltd. , https://www.cypetfoodmachine.com