In an aseptic spray drying system, all materials and air entering the system must be sterilized. The collection of the product must also be carried out in a sterile room. For this purpose, the liquid to be sprayed must be filtered and sterilized before it can be sent to the sprayer. The compressed air used for spraying must also be purified before it can be used. (The above two users take care of themselves)
The air used for drying is passed through the primary and middle efficiency filters, and the high-purity filter is used to filter the purified air. The temperature is then increased by the heater to the spray dryer. The dried product is separated from the air by a cyclone separator. The finished product is collected on the clean room clean bench. The tail gas is drained after net filtering by the bag filter.
Product features: The device adopts two-flow air atomizer, simple structure, good air flow, uniform atomization, and can meet the requirements of aseptic spray.
There is a sweeping device inside the spray tower to facilitate the cleaning of the wall of the tower.
The hot air purification adopts the three-stage filter system of early effect, intermediate effect and high efficiency, so the air purification quality is high and it meets the requirements of GMP pharmaceutical production.
HGY5253TFC Chip Spreader is designed to spray asphalt and aggregate at the same time. The two materials are mixed well in the hopper for the best cohesiveness.
Technical Parameters
Model: HGY5253TFC
Chassis model: Delong SX1250FB from Shaanxi Automobile Group
Emission standards: Euro V
Chassis motor power: 228kW/310hp
Auxiliary engine power: 40.5kW/55hp
Bitumen spray volume: 0.2-3.0kg/㎡
Aggregate spray volume: 2-22L/㎡
Heating speed of the bitumen: 20℃/h
Working speed: 3-6km/h
Aggregate size: 3-30mm
Tank volume: 6000L
Spray width: 3800mm
Hopper volume: 10m³
Material: modified bitumen, hot asphalt, rubberized asphalt, and emulsified asphalt
Total weight: 25000kg
Dimension: 10260×2500×3860mm (L×W×H)
Main Features
1. Chassis of the spreader features strong carrying capability, low oil consumption, and easy operation
2. Patented hydraulic servo technology provides powerful driving force for the system
3. The asphalt spreading machine employs intelligent control system, radar speed tester, monitor, and both automatic and manual operation system. Only one driver is needed to accomplish the distribution job
4. Pipes for carrying bitumen are coated with heat transfer oil to ensure that all of the machine parts run smoothly and don't have to be cleaned
5. The 3 anti-collision foldable sprinkler heads are of high precision and uniformity
6. The imported pump for high-viscosity asphalt meets various working conditions
7. A unique aggregate feeding and distribution system ensures the materials are sprayed uniformly, consecutively and stably
8. Different spray nozzles are controlled independently and can work jointly with each other freely
9. HD camera is equipped at back of the equipment for effective monitor and control
10. The patented bitumen tank with large volume can be heated in a short time and works to maintain the temperature of the materials. Stability of the bitumen is largely improved by the mixing device
Automatic Synchronous Chip Sealer
Automatic Synchronous Chip Sealer,Asphalt Crack Sealing Machine,Emulsion Synchronous Chip Sealer,Full Automatic Chip Sealer
Henan Gaoyuan Road Maintenance Equipment Co., Ltd. , http://www.sgroadmachinary.com