This procedure provides for the safe operation of the shaker beneficiation plant contents and requirements.
This procedure applies to the vibrating screen job of the concentrator.
2 content
2.1 Operators must be qualified after safety training; wear protective helmets, dust masks, gloves and other labor protection articles before starting work. Employees must wear three tight dresses; women workers must be in safety helmets, not wearing shorts, high heels, and slippers.
2.2 If the components of the dust removal system are in good condition, unsafe phenomena should be eliminated in time.
2.3 Before driving, check whether the protective cover of the transmission is in good condition, check the tightening of the bolts in each part of the screen, check whether there are any obstacles and obstacles in the ore, sieve surface and lower mine funnel. After confirming that there are safe driving conditions, Turn the control switch to the remote, notify the central control room to have driving conditions, and start and stop according to the instructions of the central control room.
2.4 The screening effect and the wear of the screen surface should be checked frequently, and the problems should be dealt with in a timely manner.
2.5 When the machine is faulty or repaired, the device control switch must be turned to zero. Pull down the power switch and hang the warning sign "Someone is working, no closing".
2.6 When replacing the V-belt and driving, be careful not to put your hand into the inside of the belt and the pulley to prevent injury.
2.7 After the sieve is pressed, it should be stopped first, and then the equipment can be started after being processed and inspected.
2.8 When replacing the screen surface, lay the foot pedal, fasten the seat belt, and fix the upper and lower ladders to prevent tools and debris from falling into the belt.
2.9 When replacing the screen spring, it is strictly forbidden to reach into the gap between the springs.
2.10 In-service inspection and maintenance requires a 30-minute inspection, and abnormal conditions are found and processed in time. Do not allow the screen machine to work with "illness".
2.11 The oil temperature of the exciter is between 57 and 75 degrees. If the oil temperature is too high, stop the machine immediately.
2.12 Stop the feeding before stopping, and stop the machine after all the materials are removed.
2.13 Carefully make the original records, carefully fill in the records of the class as required, and make the writing clear and tidy.
2.14 Familiar with the technical performance of all equipment in this position, master the operation, maintenance and maintenance of equipment.
Middle Speed Paper Cup Machine
Paper Cup Production Machine,Paper Coffee Cup Making Machine,Middle Speed Paper Cup Machine,Automatic Paper Cup Making Machine
RUIAN RUIZE MACHINERY CO., LTD , https://www.ruizemachinery.com