On September 25th, the professional marine hydraulic steering gear manufacturer Jiangsu Jiesheng successfully completed the bench test for the 12-sleet 16kN·m marine fork-type electro-hydraulic steering gear produced by Zhejiang Changhong Shipbuilding Co., Ltd. On-site inspection and test of no-load test, load, steering, pressure, main and standby conversion, alarm, etc. The performance indicators meet the shipyard design requirements, and the dismantling and inspection signatures are completed the next day. The user is satisfied with the quality of the steering gear and the entire test process.
According to Chen Gong, the factory, each 16kN·m electro-hydraulic steering gear has one hydraulic station, each pump station has one motor and one Oil Pump. The system configuration is more exquisite, CCS and ZC are classified into sea-going vessels and inland vessels, and the economy is used. Affordable, cost-effective. The specifications and technical parameters of the delivered servos are as follows:
Nominal torque: 16kN·m
Rudder time: ≤20S/65° (35° from one side to 30° on the other side, single pump)
Ruil angle: ±35° (limit angle: ±36.5°)
Rudder radius: 250mm
Number of rudders: Double rudder Type of rudder device: Pendulum type Maximum working pressure 8.5Mpa
Safety valve adjustment pressure: 10.6Mpa
Control form: electric control
Oil pump unit: è´° set of oil pump units, each other for standby.
The hydraulic oil grade is recommended to be N32 thickened low-condensation hydraulic oil.
Jiangsu Jiesheng Anchor Machine Co., Ltd. adheres to the quality policy of “excellent quality and standard industryâ€. The production workshops and quality control main units always adhere to the quality objectives in the production process. The relevant personnel of the project work at full capacity for 12 hours a day, for each production process. Strict monitoring, quality inspection personnel to track the whole process, serious process discipline, strict inspection process. At the same time, it focuses on the repeated inspection and rectification of mechanical processing, assembly, final assembly, paint, oil pump pipeline layout, nameplate and other links; timely discovering problems, solving problems, and implementing corrective measures in place. All the user's personalized rectification opinions were completed before delivery. The bench test process was fully prepared and arranged reasonably. The entire test, test and inspection procedures were successfully completed within 10 hours, leaving a good impression on the users.
Jiangsu Jiesheng delivers 12 sets of electric hydraulic fork-type steering gears in batches
According to Chen Gong, the factory, each 16kN·m electro-hydraulic steering gear has one hydraulic station, each pump station has one motor and one Oil Pump. The system configuration is more exquisite, CCS and ZC are classified into sea-going vessels and inland vessels, and the economy is used. Affordable, cost-effective. The specifications and technical parameters of the delivered servos are as follows:
Nominal torque: 16kN·m
Rudder time: ≤20S/65° (35° from one side to 30° on the other side, single pump)
Ruil angle: ±35° (limit angle: ±36.5°)
Rudder radius: 250mm
Number of rudders: Double rudder Type of rudder device: Pendulum type Maximum working pressure 8.5Mpa
Safety valve adjustment pressure: 10.6Mpa
Control form: electric control
Oil pump unit: è´° set of oil pump units, each other for standby.
The hydraulic oil grade is recommended to be N32 thickened low-condensation hydraulic oil.
Jiangsu Jiesheng Anchor Machine Co., Ltd. adheres to the quality policy of “excellent quality and standard industryâ€. The production workshops and quality control main units always adhere to the quality objectives in the production process. The relevant personnel of the project work at full capacity for 12 hours a day, for each production process. Strict monitoring, quality inspection personnel to track the whole process, serious process discipline, strict inspection process. At the same time, it focuses on the repeated inspection and rectification of mechanical processing, assembly, final assembly, paint, oil pump pipeline layout, nameplate and other links; timely discovering problems, solving problems, and implementing corrective measures in place. All the user's personalized rectification opinions were completed before delivery. The bench test process was fully prepared and arranged reasonably. The entire test, test and inspection procedures were successfully completed within 10 hours, leaving a good impression on the users.
Jiangsu Jiesheng delivers 12 sets of electric hydraulic fork-type steering gears in batches
It includes all auto and forklift engine brands carburetors: TOYOTA, NISSAN, MITSUBISHI, SUZUKI, VW, FIAT, MAZDA
carburetor for gasoline engine,forklift carburetor,SUZUKI CARBURETOR,AUTO CARBURETOR FOR NISSAN
HGL AUTO PARTS CO.,LTD , https://www.hgl-engineparts.com