High Quality PP Board Production Line

PP Board Production Line 
 
1, Sheet Application

 
1)      Chemical industry
 
2)      Packing
 
3)      Medicine
 
4)      Food
 
5)      Stationery and etc.

 
2, Sheet width range

 
500-2000mm

 
3, Sheet thickness range

 
0.25-25mm

 
4, Production line configuration

 
1)      Electricity control cabinet
 
2)      Single screw extruder
 
3)      Mould
 
4)      Mesh changer
 
5)  Lamination unit
 
6)      Cooling bracket
 
7)      Side-trimming unit
 
8)      Hual-off unit
 
9)      Lamination unit
 
10)   Cutter
 
11)   Conveyor

 
5, Auxiliaty machine

 
Auxiliary machine are used for recycling , the pvc sheet which are from side-trimming
can be used again .

 
1)      Crusher
 
Application : crushing the PVC sheet into small pieces

 
2)      Mixer
 
Application : mixing all materials even .

 
3)      Air compressor
 
Application : providing air .

 
6, Production period

 
50 working days after prepayment

 
7, Payment terms

 
T/T ( pre-payment 30% , balance 70%)

 
8, Warranty period

 
1 year after machine's delivery .

 
9,After-sales services
 

1) Final commissioning and training at buyer's factory.
 
2) The seller will send 1 or 2 engineers to make the final commissioning and training. All the charges (round air ticket charge, food, lodging and other local charges) have to be borne by the buyer.
 
3) US $ 100 for each engineer per day out of China should be paid by buyer

4) Both parties will negotiated the time for the final inspection and training according to the conditions between both sides.

Studded Tube

Studded tube and studded fin tube are used to enhance convection heat transfer outside the tube. In order to avoid excessive ash accumulation and affect the heat transfer effect, in addition to the mandatory burning oil and oil and gas mixed burning should be set up soot blower, but also according to the scope of use should be correctly selected nail head tube or fin tube. It not only receives the radiation heat transfer from the radiation chamber, but also absorbs the convection heat transfer from the high temperature flue gas. The surface heat intensity of the furnace tube is very high, sometimes even exceeds the heat intensity of the radiation tube. These two or three rows of furnace tubes are called shielding tubes, which can only be used as light tubes, and can not be used as nail head tubes and fin tubes. The heat transfer coefficient of the medium in the convection chamber of tubular furnace is generally much greater than that of the flue gas outside the tube.

Weld Galvanized Pipe,Stainless Steel Welded Tube,Welded Stainless Tube,Black Welded Pipe

Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com