At 2 pm on September 10th, 2012, a three-car rear-end crash occurred on the Qiqiao section of the Xicheng Expressway, causing a large red truck to push two blue pickup trucks directly out of the isolation barrier. Horizontally on the slope, the scene is very thrilling. Fortunately, the drivers of the three trucks were not life-threatening.
It is understood that the cause of the accident was that the board carried by a blue truck was accidentally dropped while driving, so the truck driver stopped immediately and wanted to pick up the fallen board. At this moment, a red truck at the back was unable to prevent it. At this point, the red truck driver had brakes too late to hit the blue truck that stopped. As the big red truck was heavily loaded and affected by inertia, another blue truck was accidentally knocked out.
A lesson of blood has repeatedly sounded the alarm. Is there any way to control and reduce truck accidents? In addition to controlling the drivers to drive illegally, installing a mechanical equipment auxiliary braking system on the vehicle is also a way to ensure the safety of the vehicle.
Scientific research shows that installing retarders on trucks can effectively balance braking and resolve brake failures, which will reduce the frequency of traffic accidents and greatly increase the safety factor of drivers and vehicles.
With the increasing emphasis on the safety of truck traffic, the State has already set the installation retarder as a rigid requirement concerning vehicle safety. According to the newly issued “Code for the Operational Safety of Motor Vehicles†(GB7258), it is clearly stated in the new standard that it exceeds 12 tons. The above trucks and dangerous goods transport vehicles will be forced to install retarders or other auxiliary braking devices. After the regulations were put forward, the most discussed issue was the installation of the retarder. In fact, the use of retarders on trucks is not yet widespread, and truck users are still in the acceptance and recognition stage.
Tai Lema has already taken a step forward in this thinking.
Tellabs Ma as the world's first brand retarder, Tellabs Ma popular in Europe and America's favorite commercial vehicle plant, in particular, has the trust of users, build factories in China since 2005, seven years eddy current retarder With the simultaneous development of passenger cars in China, the device has been highly praised by passenger car companies and has even formed the necessary products for passenger car factories and drivers.
In 1996, Tailema entered China with international brands such as Mercedes-Benz and VOLVO, bringing new terms and new experiences to eddy current retarders at that time. Because the control part of the product needs 80 super durability tests, it can effectively shorten the braking distance by 30%, and prevent the brake erroneously resulting from accidental puncture and brake shoe gap caused by brake hub overheating. 2 million times, the failure maintenance rate is only 5/10000, so the product has established a good brand image as soon as it enters the Chinese market.
Tyrema retarder compares to other eddy retarders to make the vehicle safer and more economical. Talmer retarder shortens the braking distance by more than 15% compared with other similar products, about 18 meters; prolongs the service life of the shoes at least twice; fuel consumption per 100 kilometers saves about 0.6 liters or more and less than five ten thousandths. failure rate. Tellomar retarder is well received by Chinese users for its superior performance and stable and reliable quality.
Since the introduction of the truck market into product promotion in 2011, the company has established more than 100 after-sales service sites in China to provide users with quality and timely technical support and after-sales service. After one year of hard work, it has established long-term cooperation relationships with FAW Jiefang, Dongfeng Commercial Vehicle, Beiqi Foton, Shaanxi Auto, Hualing and other vehicle companies. Tailomar retarder has been awarded to China with its superior performance and stable and reliable quality. The user's consistent high praise.
For more information on Tellabs Retarder, please click:
Sludge Dewatering Recessed Plate Filter Press
Chamber filter press takes filter cloth as the medium to separate solid and liquid. It is a separating machine with wide rang of particle size. The filter cloth spreads in a filter board surface, it is supported by the swelling groove of filter board, when the filter board is clamped, filter cloth turns to sealing materials, and the cavity between every two filter board forms a separated filter room. During the filter processing, the materials come through the central opening into filter room, the filtrate flow by the feeding pressure, flow out of the filter board after converged. Chamber filter press can be divided into two types according to filtrate discharging ways: open channel flow and under channel flow.
Advantages:
Applications:
Sludge dewatering for wastewater treatment, Foodstuff, Chemicals,Slaughter, Animal husbandry,Pharmaceutical, Electroplating, Papermaking, Leather, Printing and dyeing, Mining, Medicine, etc
Sludge Dewatering Filter Press,Filter Press,Sludge Dewatering Plate Filter Press,Screw Filter Press,Sewage Filter Press
YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatmentmachine.com