Ground source heat pump technology principle and characteristic brief introduction

Surface shallow geothermal resources (usually less than 400 meters deep) can be called Earth Energy (Earth Energy), refers to the surface soil, groundwater or rivers, lakes absorb solar energy, geothermal energy and low-lying latent heat. Ground source heat pump is the use of such low-temperature heat energy, as a heat pump heat pump and air-conditioning cold source, both heating and air conditioning system. Winter, the heat pump to the surface of the shallow heat / take / out, supply indoor heating; summer to take out the heat inside the house, released to the shallow surface to go. Ground source heat pump features are:


1 is a renewable energy technology

The superficial surface of the earth resembles a huge solar collector, collecting 47% of the solar energy, more than 500 times the amount of energy used annually by mankind. This near infinite, geographical and resource-limited low-enthalpy heat is a clean and renewable energy source that mankind can use. And unlike the solar energy can not be affected by the climate, nor the deep geothermal by the resources and geological structure constraints. In addition, ground source heat pump in winter heating, at the same time on the ground to store cold, to prepare for summer, summer air conditioning, but also to the ground to store calories for winter use. So ground source heat pump is a renewable energy technology.

2 high efficiency and low operating costs

Due to the relatively stable geothermal temperature throughout the year, the temperature in winter is higher than the ambient air temperature, the temperature in summer is lower than the ambient air temperature, which is a good heat pump heat source and air-conditioning cold source. This temperature characteristic makes the geothermal heat pump more efficient than the traditional air-conditioning system 40%, so to save energy and save about 40% of operating costs.

3 significant environmental benefits

It neither destroys groundwater resources nor is it polluted and can be built in residential areas. There is no burning, no smoke emission and no waste. There is no need to dispose of fuel waste and do not need to transport heat over long distances.

4 a machine dual-use

Ground source heat pump heating and cooling, hot and cold supply throughout the year, saving investment and land. Ground source heat pump, a kind of renewable energy utilization technology, is highly efficient and energy-saving without any pollution. It conforms to the trend of international energy development and conforms to China's energy and environmental protection policy. It is worth studying and energetically developing renewable energy utilization.

Semi-Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Batch Waste Tyre Pyrolysis Plant

Flowchat of Batch Waste Tyre Pyrolysis Plant

Batch Waste Tyre Pyrolysis Plant 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.

ITEM

PROJECT

1

Equipment Model

XY-7

XY-8

2

Door Model

Full Open Door

Full Open Door

3

Suitable Raw Materials

Rubber/Plastic Products

Rubber/Plastic Products

4

Structure

Horizontal Type Revolves

Horizontal Type Revolves

5

Reactor Size

Φ2200*6000mm  Î¦2600*6600mm

Φ2200*6000mm  Î¦2600*6600mm

6

Capacity for One Batch

5-6Mt; 8-10Mt

5-6Mt; 8-10Mt

7

Oil Yield of Tires

40%-45%

40%-45%

8

Work Pressure

Normal Pressure

Normal Pressure

9

Reactor Rotation Speed

0.4R/M

0.4R/M

10

Fuels Choice

Coal, Wood

Coal, Wood, Gas, Oil

11

Power

18KW/H

18-25KW/H

12

Cooling Method

Water Cycling

Water Cycling

13

Type of Drive

External Annular Gear

External Annular Gear

14

Heating Method

Direct

Direct

15

Type of Installation

With Foundation

With Foundation/Integrated Base

16

Noise dB(A)

≦85

≦85

17

Operation Mode

Intermittent Operation

Intermittent Operation

18

Total Weight(MT)

25-40

25-40

19

Installation Space Required

30m*10m

30m*10m

20

Manpower

3~4/batch

3~4/batch

21

  Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

 

Semi-continuous Waste Tyre Pyrolysis Plant

Semi-Continuous Waste Tyre Pyrolysis Plant,Newest Semicontinuous Used Tyre Pyrolysis Plant,Semi-Continuous Rubber Pyrolysis Plant,Practical Semi-Continuous Waste Tyre Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com

Posted on