The wiper strip is an important part of the wiper. The cleanness of the windshield of the car is directly related to the wiper strip. So choosing a good wiper strip will make your wiper work twice as much. . Many drivers ignore the problem of the wiper strip. The following are some of the issues related to the car wiper strips that Xiaobian has compiled for the riders to help the riders realize the relevant role of the car wiper dogma.
Wiper is a consumable part warranty maintenance "have a stress"
The maintenance of the vehicle is naturally a matter of course, but you know, such weather will also threaten the normal use of the wiper on our car, which will cause the rubber edge to harden or deform, dry and so on. The importance of the wiper for safe driving is self-evident. Therefore, the maintenance of wipers is equally important.
The wiper failure is not "I want to repair it."
Often owners complain that the wiper is not clean and has abnormal noise, which seriously affects driving safety.
Many car owners do not know enough about the warranty for these “wear partsâ€. Lexus owners should pay attention, we can replace the wiper strips for free within four hundred thousand kilometers. As long as you look through the "new car quality guarantee" in the on-board maintenance manual, you will find that there are many conditions for enjoying the "warranty" free cake. You can't simply understand it as "whatever you want."
The maintenance of the wiper can not be ignored
When the heavy rain blurs the line of sight, the consequences can be imagined without a dull, exhausted wiper scraping the nasty rain. At this time, you realize that it is too late to have a "healthy" wiper. In order to completely protect the safety of the driving, you can't be lazy in the maintenance of the wiper.
To properly clean the wiper: especially sand, it is the culprit of wiper wear. If you do not pay attention to cleaning, it will cause the wiper to wear out.
Try to avoid high temperature exposure: The strong heat in summer will test the rubber material of the wiper, which will cause deformation or loss of elasticity in the long run.
Say goodbye to ammonia-containing detergents: The so-called ammonia-containing detergents are general household laundry soaps or other household cleaning products, which are the killers of hardening of the rubber strips. Therefore, it is recommended that the owner choose a car-specific cleaning agent for the car.
When should the car wiper be replaced?
When the wiper works for a long time, the surface needs to be replaced when it is deformed by pressure; the surface needs to be replaced when it is scratched by a hard object. The method of judgment is as follows:
1. Pull the wiper up and use your fingers to touch the cleaned wiper rubber to check for damage and the elasticity of the rubber blade. If the blade ages, hardens, and cracks occur, it needs to be replaced.
2. When it rains, it is found that the wiper leaves traces of uneven wiping on the glass surface, which affects the field of view. This indicates that the wiper has hardened and needs to be replaced.
3. When the tension of the wiper arm spring becomes weak, the wiper arm needs to be replaced.
It can be seen that the small wiper, warranty and maintenance are also very particular.
The above is some of the relevant knowledge about the car wiper strips that Xiaobian has compiled for the riders. I hope the riders can understand this.
Plate And Tube Integrated Cutting Machine
1. Plate and tube processing, one machine for two purposes, saving space
2. High-load mechanical structure bed, stable processing and high precision
3. Customized laser generator with small slits and less energy consumption
4. Full stroke chuck, tube diameter up to 220mm
5. Short tail material, cost saving
6. The X-axis frame beam is annealed to eliminate internal stress. After rough machining, vibration and aging are carried out before finishing to ensure the rigidity and stability of the moving parts of the cutting head.
7. The bed is equipped with high-quality linear guides, driven by servo motor, high-quality rack and pinion, so that the Z-axis slide plate can achieve reciprocating motion in the X direction.
8. In the process of movement, the limit switch controls the stroke to limit the limit, and there are elastic buffer pads at both ends to limit the mechanical limit to ensure the safety of the system operation.
9. Machine base: frame structure welded with high-quality pipes, professional welding, secondary aging treatment, and precision machining by large-scale gantry milling machines. These design and processing methods ensure that the machine tool has excellent shock resistance, high rigidity and stability.
10. A dust cover is installed on the guide rail to prevent dust debris from falling into the guide rail to affect the movement, keeping clean and smooth movement.
Plate And Tube Integrated Cutting Machine,Plate And Tube Integrated Laser Cutting Machine,Plate And Pipe Laser Cutting,Sheet And Pipe Fiber Laser Machine
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com