Water cutting has many advantages. It is recognized by all. Ultra-high pressure water jet cutting is a new cold cutting process. Compared with other cutting methods, the most important feature is the non-heat source high energy jet processing, and there is no thermal process in cutting. No thermal effects are produced on the cut surfaces of all materials. Therefore, almost all metal and non-metal materials can be cut, especially for materials that are difficult or impossible to process in a variety of thermal cutting methods, and they can show their unparalleled advantages.
1) Due to the cooling effect of water, the temperature rise of the workpiece being cut is very small, the temperature in the incision (including the cutting surface) is lower than 60°C, no thermal deformation and heat affected zone are generated, and therefore the material and performance of the cut material will not be changed. .
2) The quality of the incision is high, there are no burrs, slag, cutting surface vertical, flat, good finish. And there is no tearing or strain hardening phenomenon, the thin metal plate cutting edge does not occur the phenomenon of rewind.
3) The width of the incision is small, and the width of the incision is about 0.5-1mm. The sound of cutting in the nesting material is beneficial to improve the material utilization.
4) It does not produce toxic gases and dust that are harmful to human health, and is particularly suitable for asbestos, wool fabrics, and various fiber synthetic materials.
5) For areas where open fire operations are strictly prohibited, the processing of inflammable and explosive materials such as nuclear materials, offshore oil drilling and production platforms, oil refineries, large oil and gas storage tanks, and oil and gas transmission pipelines can be safely cut. In particular, with the increasing application of carbon fiber, glass fiber, and honeycomb structural composites in aerospace and new energy fields, traditional cutting methods such as flame, laser, and plasma have been unable to complete, and water cutting is currently the only internationally recognized method. Ideal cutting method.
The compost turning machine has the many functions of turning, mixing and crushing, which is very suitable for soil remediation and microbial fermentation of chicken, cattle, sheep, pigs, and other livestock and poultry fresh manure and sewage plant sludge. Mix livestock and poultry manure, sludge with microbial preparation and straw auxiliary materials evenly. It creates a better aerobic environment for material fermentation. It can be heated up in one day, deodorized, sterilized in two days (can completely kill the bird flu virus in the feces), dry in three days, and fertilizer in 7-15 days. It is not only faster than other mechanical equipment fermentation methods, but also more efficient. It also effectively prevents the generation of harmful and malodorous gases such as hydrogen sulfide, amine gas, and indole during the fermentation process, which not only meets the requirements of environmental protection, but also produces high-quality bio-organic fertilizers in large quantities.
The TAGRM crawler-type organic composter, while equipped with a high-horsepower engine and a multi-functional hydraulic drum, has a higher working height, convenient steering, simple operation and lower maintenance costs.
Wheel Compost Turner,Compost Turner Machine,Hydraulic Crawler Compost Turner,Manure Compost Fermentation Machine
NANNING TAGRM CO.,LTD , https://www.tagrmfarming.com