Recently, Shantui DH13K2 full hydraulic bulldozer is competing with an international famous brand bulldozer on a real estate earthwork construction site in Greensboro, North Carolina, USA! This is the third DH13K2 full hydraulic bulldozer product promotion conference held by Shantui in the United States.
Strong competition
The customer of this test drive is a very important engineering contractor in the local area. The equipment requirements are very high during the operation. Two experienced operators have been sent to do the work of bulldozing, leveling and styling. After the end, the operators gave a positive evaluation of this DH13K2.
Listen to customer opinions
In this test run, Linde Germany headquarters and Linde China Company dispatched professional hydraulic and electric control engineers to cooperate with Shantui Company to visit customers and listen to customers' opinions. Linde’s excellent reputation in the United States and his cooperation strategy with Shantui have greatly enhanced the confidence of local agencies and clients in their cooperation with Shantui. (This article is from Shantui)
The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.
For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick
Safe Seal Technology Co., Ltd. , https://www.jsspreals.com