Magnetic pump use precautions

Magnetic Pump Usage Notes (A) Because magnetic bearings cooling and lubrication is transported by the medium, it is absolutely prohibited air operation, while avoiding the power failure after the restart caused by the time-space operation.
(B) is transported medium, if it contains solid particles, the pump inlet to be added to the filter: If containing ferromagnetic particles, the need to add magnetic filters.
(C) The pump should be used in the ambient temperature should be less than 40 ℃, the motor temperature should not exceed 75 ℃.
(D) the medium being transported and its temperature should be within the allowable range of the pump (see the attached table). Engineering plastics pump temperature <60 ℃, metal pump temperature <100 ℃, conveying suction pressure is not more than 0.2MPa, the maximum working pressure 1.6MPa, the density of not more than 1600Kg / m3, the viscosity is not more than 30X10-6m2 / S Liquids containing hard particles and fibers.
(E) for the transmission fluid is easy to precipitate crystallization of the media, after use should be promptly cleaned, drain the pump effusion.
(Vi) 1000 hours after the normal operation of the magnetic pump should be demolished bearing and face ring wear and tear, and replace the consumable parts should not be reused.

Static Guide

Static Guide,Entrance Sliding Guide,Finish Rolling Export Sliding Guide,Hot Rolled Steel Entry Sliding Guides

JINGJIANG EASTSUN METALLURGICAL MECHANICS CO.,LTD , https://www.jesguide.com

Posted on