The Jiangsu Province high-tech enterprise Changzhou Jinling Drying Equipment Co., Ltd. established a solid waste treatment technology development center jointly with Southeast University, and has recently developed a series of solid waste treatment equipment. Among them, the fluidized bed sludge drying device has been proved by the user to fully meet the design requirements.
After the wet sludge is continuously added to the new fluidized bed dryer from one end, the dry sludge can be continuously discharged at the other end. The evaporated water is recovered by the condenser and discharged to the sewage treatment system. The dried sludge is reheated to be decomposed into oil. Non-condensable gases, charcoal, etc. will not cause secondary pollution. The device has the advantages of flexible operation, continuous operation, compact design, no mechanical transmission parts, low failure, low investment, high moisture content of more than 80% moisture content can be dried at once to moisture content below 5%, and the drying time is short. low.
After the wet sludge is continuously added to the new fluidized bed dryer from one end, the dry sludge can be continuously discharged at the other end. The evaporated water is recovered by the condenser and discharged to the sewage treatment system. The dried sludge is reheated to be decomposed into oil. Non-condensable gases, charcoal, etc. will not cause secondary pollution. The device has the advantages of flexible operation, continuous operation, compact design, no mechanical transmission parts, low failure, low investment, high moisture content of more than 80% moisture content can be dried at once to moisture content below 5%, and the drying time is short. low.