Abstract: Crude fiber measuring instrument cxc-06 is a crude fiber measuring instrument developed and manufactured by Topsun. The crude fiber measuring instrument cxc-06 is based on the commonly used acid-alkali digestion method to simmer the sample and carry out the weight measurement. Measured to obtain the crude fiber content of the instrument. It is also a good helper for the determination of crude fiber content in various feeds, grains, grains, and foods.
Crude fiber tester cxc-06 working principle introduction:
Crude fiber tester cxc-06 uses an accurate concentration of acid and alkali to decompose the sample under specific conditions, and then removes soluble matter with ethanol. After burning at high temperature, the amount of minerals is deducted and the content is called crude fiber. It is not a definitive chemical entity, but it is a schematic component that is determined under generally recognized mandatory conditions. It is dominated by cellulose, with a small amount of hemicellulose and lignin.
Crude Fiber Tester cxc-06 Specifications:
1. Measurement targets: various feed, grain, grain, food, and other agricultural and sideline products that need to determine crude fiber content;
2, the number of test samples: 6 / time;
3. Repeatability error: crude fiber content below 10%, absolute error ≤ 0.4; crude fiber content above 10%, relative error ≤ 4%;
4, the determination time: on the instrument is required for about 90min (including acid 30 minutes, alkali 30 minutes, suction filtration and washing about 30 minutes);
5, the power supply voltage: AC 220V/50HZ;
6, power: 3.3KVA;
7, the volume: 540 × 450 × 670mm3;
8, weight: 28Kg.
THOR Series 2.0 Tons Electric Forklift
Electric Stacker Forklift,2.0 Tons Electric Forklift,4-Wheel Mini Electric Forklift,High Quality 2.0 Tons Electric Forklift
MASCOT ENTERPRISE LTD , https://www.green-mascot.com