Digital display and preset of current and voltage, wide adjustment range of voltage.
The special automatic molten-ball moving function at the end of wire.
Adopt the double-close-loop system to control the arc and wave control system to adjust the arc force.
Supporting solid/flux-core of different specification.
Single-wheel wire feeder, big power, feeding wire stably.
Wide range of supply voltage as wide as 100%.
Type Contents | NBC-350 |
Power source | 3-phase 380V/415V  50/60Hz |
Rated input current | 22A |
Rated input capacity | 14.5 KVA |
Rated welding current/voltage | 350A/31.5V |
Welding current | 350A 60%DE |
270AÂ 100%DE | |
No-load voltage (MAX) | 65V |
Adjust.  range of welding current | 40-350A |
Efficiency | 83% |
Diameter of wire | Φ 0.8~Φ 2.0mm solid/flux-cored wire |
Dimensions (mm) | 590× 306× 500 |
 Automatic protection from over-current, overheat, oveer/under-voltage.
 Digital display and preset of current and voltage, wide adjustment range of voltage.
The special automatic molten-ball moving function at the end of wire.
Adopt the double-close-loop system to control the arc and wave control system to adjust the arc force.
Supporting solid/flux-core of different specification.
Single-wheel wire feeder, big power, feeding wire stably.
Wide range of supply voltage as wide as 100%.
Type Contents | NBC-350 |
Power source | 3-phase 380V/415V  50/60Hz |
Rated input current | 22A |
Rated input capacity | 14.5 KVA |
Rated welding current/voltage | 350A/31.5V |
Welding current | 350A 60%DE |
270AÂ 100%DE | |
No-load voltage (MAX) | 65V |
Adjust.  range of welding current | 40-350A |
Efficiency | 83% |
Diameter of wire | Φ 0.8~Φ 2.0mm solid/flux-cored wire |
Dimensions (mm) | 590× 306× 500 |
Â
SR series Single shaft shredder is a crushing machine with perfect design. It`s wide used and qualified to shred various waste materials such as plastic block & pipes, woven bags, cable, wood, paper, domestic rubbish, electronic waste and so on. The suitable screen can be chosen according to fed materials and the next processing requirement. The output material discharged by the shredder could be directly reused or further shred into small pieces. SR series shredder can be equipped with many different rotor and its rotor process requirements of cooling system, bead weld & wearing layer can also be additionally added according to customers` requests for disposing various waste materials.
Aluminum Shavings Shredder, Steel Shavings Shredder, Aluminum Shredder, Steel Shredder, Metal Shredder
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyeya.com