The main structure of the coal gangue hammer is broken: the structure of the machine is mainly composed of the main machine, the analyzer, the fan, the finished cyclone separator, the fine powder cyclone separator and the air duct. Among them, the main body is composed of a frame, an inlet volute, a blade, a grinding roller, a grinding ring and a cover.
Our products are sold to: Hebei, Shanxi, Shandong, Sichuan, Guizhou, Yunnan, Guangxi, Guangdong, Jiangsu, Zhejiang, Jiangxi, Hubei, Hunan, Liaoning, Heilongjiang, Jilin, Gansu, Ningxia, Qinghai, Tibet, Fujian, Hainan, Anhui, Shaanxi, Chongqing, Tianjin, Shanghai, Beijing, Inner Mongolia, Xinjiang.
Collieric coal gangue European version hammer working principle:
During work, the material to be pulverized is fed into the machine from the feeding hopper on the side of the hood, and is revolved around the vertical axis by means of a grinding roller device suspended on the main stand of the main machine, while rotating itself, due to the centrifugal force during rotation, The grinding roller swings outward and presses against the grinding ring, so that the blade shovel the material to the grinding roller and the grinding ring, and the purpose of pulverizing the material is achieved by rolling rolling of the grinding roller.
Wind selection process: After the material is ground, the fan blows the wind into the main casing, blows up the powder, and sorts it through the analyzer placed above the grinding chamber. The coarse and coarse material falls into the grinding chamber and re-grinds. The degree of compliance with the wind enters the cyclone collector, and is collected and discharged through the powder outlet, which is the finished product. The wind flow is returned to the fan by the return air pipe at the upper end of the large cyclone collector. The air path is circulated and flows under the negative pressure state. The increased air volume of the circulating air path is discharged through the exhaust pipe between the fan and the main engine, and enters the small cyclone collection. The device is cleaned.
Brake fluid is divided into four main categories: DOT3, DOT4, DOT5 and DOT5.1. The common categories on the market are mainly Brake fluid DOT 3, Brake fluid DOT 4 and Brake fluid DOT 5.1. Brake fluid, also known as brake oil, is an indispensable part of the braking system and is the liquid medium that transmits braking pressure in the hydraulic braking system.
It is very important to replace the brake fluid regularly, which can effectively reduce the situation that the brake fluid absorbs too much water and is more prone to air lock.
Brake fluid replacement cycle
Normally, the replacement cycle of brake fluid is 2-3 years (40,000-60,000 kilometers), but in actual use, we still need to conduct regular inspections according to the use environment and the recommended information in the maintenance manual to check whether the brake fluid is oxidized or deteriorated. Wait, most 4S stores will check the brake fluid when we perform maintenance, and consumers only need to perform regular vehicle maintenance.
Brake Oil,Brake Oil Fluid,Brake Fluid Dot 3,Brake Fluid Dot 4
Guangzhou Lidi Automobile Supplies Co., Ltd. , https://www.lambosscn.com