Car care precautions after rain

Summer came, heavy rain and rain continued to cool the cities around the country. People were comfortable. The cute car experienced wind and rain. It is time for the rain to stop, and it is time for the car to do maintenance. The symptoms of mildew in the car and unlit lights may come to you.

The first step: dehumidify the car

In fact, dehumidification work should be done when it is raining. When it rains, you should open the cold air. This will not only remove the fog, but also have the function of dehumidification. When the rain stopped, it became even more noticeable that accumulated moisture should be removed as quickly as possible, otherwise mildew and Other conditions would easily occur. In addition to air-conditioned dehumidifiers, it is best to buy a simple dehumidification box so that the interior parts will not be affected by moisture overnight. Another roll of toilet paper in the car also has the effect of dehumidification.

After the rain, in addition to welding and welding of the car body parts, it is easy to rust and corrode. In addition, iron parts such as hinges and locks inside the doors are covered by the door trim, and are easily exposed to moisture. Therefore, when the weather is fine, the owner can find a shade. In the place, all the doors and trunk lids are opened, the moisture inside the vehicle is exhausted and ventilated, and then the mats and seat covers inside the vehicle are removed, washed and dried.

Step Two: Sterilization in the Vehicle

After summer rain, due to factors such as temperature, it is relatively easy to breed various germs, so it is particularly important to disinfect and sterilize the interior space. Places that are important for cleaning should be seats, air conditioning outlets, central control panels, and dead spots. Use a professional car interior cleaner and wipe it with a dry rag.

When cleaning the center console, it is necessary to prevent cleaners from penetrating into CD, speakers, radios, and other electrical equipment from corroding electrical components.

Step 3: Maintenance Chassis

The high temperature in summer, coupled with the invasion of rain, the chassis is vulnerable to damage, exhaust gas, dust, noise, moisture will penetrate the body from the small hole in the chassis, so that the body rust, peeling. Therefore, after the heavy rain, we must do some maintenance work on the chassis.

In addition to simple cleaning, "chassis closure" is also a good choice. It can make the chassis isolated from the outside world, achieve anti-corrosion, anti-rust and sound insulation functions, and extend the life of the vehicle body. Before the â€œchassis sealing,â€ special detergents should be used to remove the asphalt and oil adhered to the chassis and dry it. Any stains will affect the firmness of the seal. Before sealing, the heat-dissipating parts of the drive system and the exhaust system must be shielded so that the normal operation of these components will not be affected after sealing.

Step 4: Clean the appearance

The car is like its own person, don't bother to wash the car after the rain, otherwise it will seriously affect the personal image. In fact, not only the personal image problem, in addition to sewage and sludge in the rainy day, the acid contained in the rain also has serious damage to the body and paint. If it is not dealt with in time, the body will lose its luster and affect the appearance.

The easiest and most effective way to prevent acid rain from damaging the car body is to wax it. To achieve a very long-lasting protective effect, it must be sealed. Both of them can prevent the fading and aging of the paint, thus protecting the paint. hurt.

Step 5: Check the Circuit

After rain, the car may have some impact on the performance of certain parts of the car due to multiple irrigation, which can seriously lead to the car can not be opened normally. The circuit is likely to cause a short circuit after it encounters water. If the engine is off in progress, ignition cannot be started again, otherwise it is very easy to cause the engine to be scrapped. If there is wading, the circuit equipment should be processed in time, and the circuit can be wiped dry with non-fiber paper towels and textiles before starting.

In addition, it is also important to check the brake system. Because the brake system has a very strong adsorption force, rainwater is very easy to enter the brake fluid, this will affect the braking effect, and may seriously cause brake failure. It is recommended to check in a professional maintenance shop after rain to prevent future troubles.

Step 6: Check the headlights

Rainy days can easily lead to flooding of headlights. The brightness of the headlights will be affected after entering the water. Many water intakes may also damage the headlights, and will also change the direction of illumination of the headlights. This will bring hidden dangers to vehicle safety. Therefore, it is important to check whether the headlights are filled with water.

If you find that there is water mist in the headlights, you can turn on the headlights and turn on the high beam. After 10 minutes, if the water mist in the headlights starts to disappear, can you completely disappear after an hour? If you disappear, you donâ€™t have to worry about it. However, if there is water fog, it is necessary to go to a professional service station for processing.

Buick Radiator Fan

About Buick fan, we provide 20 Buick radiator fans.

The oem numbers are in the below content.

96553241 96553377 5484572
96553242 96553376 5484589
96553364 5484573
92099808 5490624
93730025
10313769 12367288
13286332
R8956003 13241747
10313769 12367288
90765376
95026332
13289626 1314008
13220116
26209141
22965087
804850086
13356648
13356630
13453909

Engine Cooling Fan,Buick Radiator Fan,Car Cooling Radiator Fan,Radiator Plastic Cooling Fan

RUIAN HENGXIN AUTO PARTS CO.,LTD. , https://www.hengxinauto.com