Black 410/350-8 PU Foamed Wheelbarrow Wheel

Model NO.: SM10UBC-W8250MG587OSZ58PBB
Origin: Jiaxing Zhejiang

Tire varied colors and sizes Meet your requirements.

Flat Free Hand Truck Tires:pneumatic wheel/barrow tire/barrow tyre/wheelbarrow wheel/tool cart wheel/hand trolley wheel
Wide Range of Use: for wheel barrow,hand trolley,tool cart,dustbin,lawnmover,equipment ,machine etc

Flat Free Polyurethane Hand Truck Tires
These flat proof hand truck tires are made of lightweight polyurethane foam and perform just like an air filled tire. The specialized foam memory gives our tires the same durability, bounce and cushion of air filled tires- with out all the flats!

Heavy duty hand trucks, dolly hand trucks and stair climbing trucks flat proof tires will keep working, preventing the headaches and cost of a flat tire!

Polyurethane foam is more resistant to abrasion than rubber, so it is much more difficult to wear through the surface. Even if the surface becomes worn,Flat Free Hand Truck Tires perform very well.

Foam is similar to rubber for chemical resistance, but will not be damaged by UV Rays or Ozone- major causes of cracking and rotting in tires

Black 410/350-8 PU Foamed Wheelbarrow Wheel

The tire surface is smooth, without cracking deformation.Black 410/350-8 PU Foamed Wheelbarrow Wheel
2.80/2.50-4 pu foamed Tires
Tread Design smooth
Wheel Width 3.25"9(82.55mm)
Outer Diam. 10.2"(259.08mm)
Color black
Type PU formed
Load Rating 450 lbs
Wheel  8" steel rim(one pirce)
Hub 6"
Bearing 5/8"
Item No. SM10UBC-W8250MG587OSZ58PBB
Jiaxing Carefree Caster offers a full range of Flat Free tires,pneumatic tires, and casters ranging from lawn & garden equipment, industrial material handling equipment, medical mobility equipment,scooters. Golf carts, bicycles, and baby strollers.Black 410/350-8 PU Foamed Wheelbarrow Wheel
 

Floating Head Heat Exchanger

Floated type shell&tube heat exchanger is mostly used for large temperature fluctuations and temperature differences, compared with Fixed Tube Heat Exchanger, its structure is more complex and more expensive.



One end of the tube is fixed on an immobile Tube Sheet, which is clamped between the shell Flange and the tube flange, and is connected by bolts; the other end of the tube is fixed on a floating head tube sheet, which is clamped between the floating cover and the hook ring connected by studs, forming a floating head that can move freely in the shell.



If the tube bundle and the shell are heated and elongated, they do not affect each other, so there is no temperature difference stress. The floating part is a detachable connection consisting of the floating tube sheet, hook ring and floating cover. It is easier to take the tube bundle out, and the tube can be cleaned both inside and outside and is easy access.

Floating Head Heat Exchanger,Floating Head Exchanger,Floating Head Type Heat Exchanger,Floating Tubesheet Heat Exchanger

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com

Posted on