Audi q5 is a wet dual-clutch seven-speed gearbox. Today, I will tell you about the precautions for refueling.
This bolt is a fuel filler. On the side of the gearbox, you need to raise from this hole when you refuel until it flows out. Then start the vehicle. At this time, the pump will work and continue to add until it overflows again. It is.
To be clear, there are two kinds of oil in this gearbox, one is the valve body oil, the other is the gear oil, don't put it wrong, or it will be paralyzed. The valve body oil, that is, the oil to be replaced, is near the front end of the gearbox, a black oil sump. Behind the gear oil, lubricate the gear inside.
The rear of the gearbox is like this, so it can be filled with ordinary gear oil. When it is filled, it can be added directly to the overflow without starting. It is the standard position.
This gearbox is made up of two parts, the oil is also unreachable, and the oil should be fine. Remember to change the transmission oil for 60,000 kilometers, the gear oil is almost maintenance-free for life.
Metal 3D Printer,Ceramic Sand Casting Molds,Advanced Metal 3D Printer,Compact Binder Jet 3D Printer
Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl3dprinter.com