Vigorously sort out the lifting mechanism on the CD1 electric hoist

The CD1 type electric hoist is one of the wire rope electric hoists. It has only one kind of hoisting speed. The following is the hoisting structure of the CD1 type electric hoist that Lingying arranged .

  The CD1 electric hoist hoisting mechanism adopts a conical rotor motor, which can realize the characteristics of axial magnetic pull of the product. At the start, the magnetic pull force customer service spring pressure causes the fan brake wheel integrated with the rotor and the stator to generate an axial displacement, thereby braking The brake ring is disengaged from the rear end, the rotor is free to operate in the working state, and the input shaft of the reducer is driven directly by the intermediate shaft device. After the three-stage gear deceleration, the oil shaft of the reducer-hollow shaft drives the reel. Turn and wind the wire rope to lift the hook. When the power is turned off, the magnetic pull force disappears. Under the action of the pressure spring, the difference between the brake wheel and the rear end of the fan is braked tightly, and the braking effect is obtained by the frictional force of the brake. (sort out)