TPMS Sensor Snap-in Valves, Tire Valve Stem TPMS

  • Model NO.: TPMS
  • OEM: Support
  • Warranty: 12 Months
  • Transport Package: 100PCS/Pack, 10 Pack / Box
  • Origin: China
  • Type: TPMS Tire Valve
  • Delivery Time: 15 Days
  • Trademark: JRL
  • Specification: 53mm
  • HS Code: 848130000

TPMS Sensor Snap-In Valves,Tire Valve Stem TPMS


Specifications:

 

1)Item:TPMS

2)Material: Aluminium alloy/EPDM Rubber + Environmental Protection Brass
3)Rim Holes:11.3MM / .453''
4)Color: Red, Yellow, Gold, Blue, Green...Total 12 Colors
5)Packing: 100pcs/bag, 20bags/ctn as neutral packing or according to your requirements
6.)Effective Installed Valve Stem Height: 1.25"
7.)Thread Length: 1.2cm / 0.47"
8.)Cap Diameter: 1cm / 0.39"
9.)Installation: Snaps in (Pull Type) from back of wheel, TPMS Sensor (Not Included) Installs to back of Stem 

Description:
 

1)Made with EPDM rubber to resist to zone damage and prevent from mature deterioration caused by rim hole compression, heat and cold.

2)The snap-in type can be quikly mounted to the rim. It is flexible in nature so it may provide complete air-seal even when it is bent for aire service or tire pressure check.

3)100% Warranty Quality  & 100% Testing

4)With TS16949

 

TR NO.  Ref Length
(mm)		 Rim holes
(mm/in. )		 Parts
Rubber
Grommer		 Washer Nut Cap
TR420 Φ20X53 Φ11.5/. 453"          VC8-S
DC-G1 Φ16X33 Φ11.5/. 453" RG54 RW15 HN9 FT
TRV700 Φ19X46 Φ11.5/. 453" RG54 RW8 HN4 ET/BT
TRVA100 Φ17.5X41 Φ11.5/. 453" RG54 RW15 HN9   
TRVA200-B Φ16X38 Φ11.5/. 453" RG54 RW15 HN9 ET/BT
TRVA200 Φ17.5X38 Φ11.5/. 453" RG54 RW15 HN9 ET/BT
TRVR300 Φ19X67 Φ11.5/. 453" RG54 RW8 HN4 ET/BT
TRVR300-02 Φ19X58.5 Φ11.5/. 453" RG54 RW8 HN4 ET/BT
TRVR400 Φ17X137X90° Φ11.5/. 453" RG54, HG2 RW4    ET/BT
VW9-2P Φ17X112X90° Φ11.5/. 453" RG54, HG2 RW4    ET/BT
PVR-152 Φ16X65-90° Φ11.5/. 453" RG54 RW8 HN4 DT
PVR-153 Φ17X70-90° Φ11.5/. 453'' RG54 RW8 HN4 ET/BT

TPMS Sensor Snap-in Valves, Tire Valve Stem TPMS
TPMS Sensor Snap-in Valves, Tire Valve Stem TPMS


TPMS Sensor Snap-in Valves, Tire Valve Stem TPMS
TPMS Sensor Snap-in Valves, Tire Valve Stem TPMS
TPMS Sensor Snap-in Valves, Tire Valve Stem TPMSTPMS Sensor Snap-in Valves, Tire Valve Stem TPMS

 

Bronze Components

Bronze Components consists of a variety of alloys: Cu, Zn, Sn, Mn, Al, has a high corrosion resistance and wear resistance. Our CNC machining bronze has the following models: C220, C510, C630, C863, C936. Bronze Components in the sea water, salt water immersion has a very good tolerance. Bronze Components used in the ship, automobile, consumer and industrial sectors. Bronze Components have good electrical conductivity, easy to heat, to ensure safety at the same time with a strong anti-fatigue. Bronze Components has excellent mechanical machining performance and chip performance, can quickly shorten the parts machining time.

Machining Bronze Components, Precision Turned Bronze Parts, Phosphor Bronze Parts, CNC Machining Bronze Parts

Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com

Posted on