Solenoid valve installation Before using the product should refer to the instructions for use, whether it meets your requirements. The pipeline should be washed before use, the media is not clean filter should be installed to prevent impurities to prevent the normal operation of the solenoid valve. Solenoid valve is generally one-way work, can not be installed, the arrow on the valve is the fluid direction of the pipeline must be consistent. Solenoid valve installation level of the general body, the coil up vertically, some products can be any installation, but when conditions permit the best vertical to increase the service life. Solenoid valve in the ice should be re-heated work place, or set insulation measures. Electromagnetic coil lead (connector) is connected, you should confirm the firm, the contact electrical components should not shake, loose will cause the solenoid valve does not work. Continuous production of the solenoid valve to work, the best bypass, easy maintenance, does not affect the production. Solenoid valve after a long period of deactivation should be cleared to facilitate the use of condensate after the removal of all parts should be placed in order to restore the original state installed.
Sodium Dichloroisocyanurate (SDIC) widely applied for the sterilization of swimming pool and drinking water, or fighting against infectious diseases, or act as disinfectant in raising silkworm, livestock, poultry and fish. Other applications of SDIC are found in wool shrinkage, textile bleaching, and industrial circulating water cleaning. SDIC is normally supplied in powder and granular, tablets are also available on request. Stabilised chlorine granular (dichlor) are used very widely to chlorinate swimming pool water. The product has high efficiency and constant performance and has no harm to human beings.
Pool Sterilization SDIC,SDIC 50%,Sodium Dichloroisocyanurate,SDIC Tablets
HENAN JINHE INDUSTRY CO.,LTD , https://www.hncarbonblack.com