FeaturesÂ
1. Dual Pistion Rack
2. Integrated Design
3. High Output Power
4. Integrated Design
5. Long Service Life
6. Stainless steel fasteners for long term corrosion resistance
7. The interface between piston, pinion and body is made of low friction material
Specifications
1). Actuator Body: Stainless Steel (SS304)
2). Piston: Aluminium Alloy
3). Shaft: Stainless Steel
4). Temperature: -20ºC--+85ºC
5). Torque: 3.5 - 4150Nm
6). Air-Pressure: 2.5 - 8 bar
7). Motion time: 0.25-3S
8). Type: Double Acting, Spring Return (Single Acting)
9). Adjustment Range: ±5°
Standards
a. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO
  5211, the axle assembles orifice according to DIN 3337Â
b. Interface between actuator and control valve: 7100 D/S-7350 D/S according to
  NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plateÂ
c. Interface between actuator and signal box: according to VDI/VDE 3845
Introduction
Stainless Steel Pneumatic Actuator (RT Series)Â
KT Pneumatic Actuator RT Series is quite suitable for severe, harsh or corrosive working conditions. Body, Bolt/Nut, Shaft, Piston are all made of stainless steel to ensure the anti-corrosion of actuator. It's used to actuate rotary stroke valve, such as ball valve, butterfly valve, etc. I. Front: Air supply connection is designed in accordance with NAMUR Standard to install solenoid valves
II. Bottom: Bottom mounting connection is designed in accordance with ISO 5211/DIN 3337 standards for direct mounting of valve gear boxes or mounting brackets.
III. Upper: NAMUR drive shaft and NAMUR top mounting connection allow the installation of accessories such as limit switch box and positioners.
Â
|
Brand: |
KT/OEM |
| Applicable Media: | Water, Oil, Gas, Nitric Acid, Acetic Acid |
| Certification: | CE/API/DNV/FDA/ISO9001-2008 |
| Sample Testing: | One Sample for free( Under $10),Freight Collect |
| Packing: | Plastic Bag, Carton & Plywood Case/According to customers' requirement. |
| Payment: | T/T, L/C, D/P, Western Union, Paypal |
| Port: | NINGBO/SHANGHAI, Customers' Request |
| Delivery Time: | Within 35days after receiving T/T deposit Payment |
| Term of Delivery: | FOB/CNF/CIF, Customers' Request |
RT-S Stainless Steel Pneumatic Actuator
FeaturesÂ
1. Dual Pistion Rack
2. Integrated Design
3. High Output Power
4. Integrated Design
5. Long Service Life
6. Stainless steel fasteners for long term corrosion resistance
7. The interface between piston, pinion and body is made of low friction material
Specifications
1). Actuator Body: Stainless Steel (SS304)
2). Piston: Aluminium Alloy
3). Shaft: Stainless Steel
4). Temperature: -20ºC--+85ºC
5). Torque: 3.5 - 4150Nm
6). Air-Pressure: 2.5 - 8 bar
7). Motion time: 0.25-3S
8). Type: Double Acting, Spring Return (Single Acting)
9). Adjustment Range: ±5°
Standards
a. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO
  5211, the axle assembles orifice according to DIN 3337Â
b. Interface between actuator and control valve: 7100 D/S-7350 D/S according to
  NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plateÂ
c. Interface between actuator and signal box: according to VDI/VDE 3845
Introduction
Stainless Steel Pneumatic Actuator (RT Series)Â
KT Pneumatic Actuator RT Series is quite suitable for severe, harsh or corrosive working conditions. Body, Bolt/Nut, Shaft, Piston are all made of stainless steel to ensure the anti-corrosion of actuator. It's used to actuate rotary stroke valve, such as ball valve, butterfly valve, etc. I. Front: Air supply connection is designed in accordance with NAMUR Standard to install solenoid valves
II. Bottom: Bottom mounting connection is designed in accordance with ISO 5211/DIN 3337 standards for direct mounting of valve gear boxes or mounting brackets.
III. Upper: NAMUR drive shaft and NAMUR top mounting connection allow the installation of accessories such as limit switch box and positioners.
Â
|
Brand: |
KT/OEM |
| Applicable Media: | Water, Oil, Gas, Nitric Acid, Acetic Acid |
| Certification: | CE/API/DNV/FDA/ISO9001-2008 |
| Sample Testing: | One Sample for free( Under $10),Freight Collect |
| Packing: | Plastic Bag, Carton & Plywood Case/According to customers' requirement. |
| Payment: | T/T, L/C, D/P, Western Union, Paypal |
| Port: | NINGBO/SHANGHAI, Customers' Request |
| Delivery Time: | Within 35days after receiving T/T deposit Payment |
| Term of Delivery: | FOB/CNF/CIF, Customers' Request |
Automotive plastic parts are components made of various plastics that are used in the manufacture and repair of vehicles. These parts are used in various areas of the vehicle, including the interior, exterior, engine, and more. They are favored for their light weight, low cost and versatility.Automobile Parts.
1. Instrument Panel: This is the control panel located directly in front of the driver of the vehicle that displays the instruments and controls for vehicle operation.
2. Headlight and Taillight Covers: These covers are often made of polycarbonate due to its high impact resistance and ability to be formed into complex shapes.
3. Seat Belts: Although seat belts are not entirely made of plastic, seat belts often use plastic parts for their buckles and adjustment mechanisms.Car Spare Parts.
4. Air filters: They are usually made of various types of plastic and are used to filter out harmful particles from the air before it enters the engine.
5. Engine parts: Many parts of the engine, such as valve covers, oil pans, intake manifolds, etc., can be made of plastic to reduce weight and cost.
6. Radiator Fans: These fans are usually made of plastic due to their heat resistance and light weight.
7. Rim decorative cover, embedded on the wheel hub, plays a decorative role.Automobile Spare Parts
These are just a few examples of the many plastic components used in automotive applications. The use of plastics in vehicles continues to grow.Car Components.
Automobile Parts,Car Spare Parts,Automobile Spare Parts,Car Components
Kunshan Muchun Electric Co., LTD , https://www.muchunelectric.com