Cut to Length Line Process Introduction
Two shearing two punching silicon steel cutting line with step-lap is an automatic production line for the silicon steel sheet shearing, consists of the following parts:Uncoiler, Feed buffer, Feeder, Punch parts, Shear parts, Conveyor, Material machine, Pneumatic system, Electronic control system.
Cut to Length Line Equipment Composition
1,Specification
| Application Materials | silicon steel coil |
| Material Width(mm) | 0.23-0.35 |
| Material Width(mm) | 40-300 |
| Coil Inner Diameter(mm) | 495-510 |
| Single Head Coil Weight(t) | 1.5 |
| Feeding Speed(m/min) | 0-180 |
| Cutting Blade Material | YG11-N |
| Cutting Blade Hardness | HRA87.8 |
| Cutting Blade Density(g/cm3) | 14.45 |
| Cutting Blade Bending Strength(N/mm2) | 3180 |
2,The Finished Product Parameters and Picture
| Cut Length(mm) | 350-9000 |
| Length of Tolerance(mm/m)(when in constant speed) | ±0.2/2 |
| Cutting Angle Accuracy DEG | ±0.025 |
| Cutting Burr(mm) | ≤0.02 |
| Punching Burr(mm) | ≤0.02 |
High Speed High Precision Cut to Length Line Parameters
1,High Speed High Precision Slitting Line
| Model Name | JT1250 |
| Cutting Thickness(mm) | 0.23-0.5 |
| Cutting Width(mm) | 40-1200 |
| Coil Weight(t) | 5 |
| Feeding Speed(m/min) | 80-120 |
| Straightness Deviation of Each Edge(mm/m) | 0.1 |
| Cutting Angle Accuracy DEG | ±0.025 |
| Band Width Accuracy(mm) | ±0.1 |
| Total Motor Power(KW) | 55 |
2,Precision high speed cut-to-length linenonstop cutting
Two cutting two punching(ordinary type)
| Model Name | JTXE-LL-300 | JTXE-LL-400 |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 |
| Cutting Length(mm) | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 15 | 16.5 |
Two cutting two punching(step type)
| Model Name | JTXE-LL-300Z | JTXE-LL-400Z |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 |
| Cutting Length(mm) | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 20 | 21.5 |
Two cutting two punching(centralized positioning)
| Model Name | JTXE-LL-400ZX | JTXE-LL-600ZX |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-400 | 60-600 |
| Cutting Length(mm) | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 24 | 26 |
3,Precision high speed cut-to-length linenonstop cutting
Two cutting one punching
| Model Name | JTXE-X-300 | JTXE-X-400 | JTXE-X-600 |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 | 60-600 |
| Cutting Length(mm) | 350-9999 | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 12 | 13.5 | 13.5 |
4,Center Post Silicon Steel Cut to Length Line(step type)
| Model Name | JTXE-ZZ-300Z | JTXE-ZZ-400Z |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 |
| Cutting Length(mm) | 150-9999 | 150-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 14 | 14 |
5,Electric Reactor Silicon Steel Cut to Length Line
| Model Name | JTXE-300 | JTXE-400 | JTXE-600 |
| Cutting Thickness(mm) | 0.23-0.5 | 0.23-0.5 | 0.23-0.5 |
| Cutting Width(mm) | 40-300 | 40-400 | 40-600 |
| Cutting Length(mm) | 10-9999 | 10-9999 | 10-9999 |
| Feeding Speed(m/min) | 180 | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.05 | ±0.05 | ±0.05 |
| Total Motor Power(KW) | 10 | 10 | 12 |
Two Cutting Two Punching Silicon Steel Cut to Length Line Working Process
Cut to Length Line Certificate
Cut to Length Line Packaging
Â
The pulverizer is a machine that crushes large solid raw materials to the required size.
According to the size of the crushed material or crushed material, the pulverizer can be divided into coarse pulverizer, pulverizer and ultra-fine pulverizer.
There are four kinds of external forces applied to the solid during the crushing process: shearing, impact, rolling and grinding. Shearing is mainly used in coarse crushing (crushing) and crushing operations, and is applicable to crushing or crushing operations of materials with toughness or fiber and bulk materials; Impact is mainly used in crushing operation, suitable for crushing brittle materials; Rolling is mainly used in high fineness grinding (ultra-fine grinding) operation, which is suitable for ultra-fine grinding of most materials; Grinding is mainly used for ultra-fine grinding or ultra-large grinding equipment, which is suitable for further grinding after grinding operation.
The actual crushing process often involves several external forces acting at the same time, but high-end pulverizers are tailored according to the crushing environment.
Crusher Material ,Crush Sand Machine ,Raw Material Crusher,Material Crusher Machine
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com