2.It is widely used in the dehydration and drying of various regional and seasonal vegetables and fruits. We design and manufacture the most suitable vegetable drying equipment with best quality according to the characteristics of products which need to be dried, technological requirements of customers and combining with the experience for dozens of years.The drying area, wind pressure, blast capacity, drying temperature and running speed of mesh belt are adjustable to accord with the characteristics and quality requirements of vegetables.
3.Applicable Range of Tunnel-type Hot Air Drying Assemble LineThe machine can meet the drying and high-volume continuous production demands of strips, pieces, sheets, large particles of root, stem and leaf vegetables and at the same time, it can retain the nutrition and color of products at the maximum extent. The typical dried materials include: garlic slice, pumpkin, carrot, konjac, Chinese yam, bamboo shoots, horseradishes, onions, apples, etc.
B.Equipment parameters
| TYPE | POWER | DIMENSION | layer amount | heating model |
| 15000 | 166kw | 15000*2200*2700mm | 5 | Steam heating |
D.Our factory
E.Cooperative clientÂ
F.Contact us
The forced circulation pump does not rely on the centrifugal force of the impeller to the liquid, but uses the thrust of the rotating impeller blades to make the sent liquid flow along the direction of the pump axis. When the pump shaft is driven by the motor to rotate, because the blade has a certain helix angle with the axis of the pump shaft, a thrust (or lift) is generated on the liquid, and the liquid is pushed out and discharged along the discharge pipe. When the liquid is pushed out, a partial vacuum is formed at the original position, and the liquid outside will be sucked into the impeller along the inlet pipe under the action of atmospheric pressure. As long as the impeller keeps rotating, the pump can continuously suck in and discharge liquid. The forced circulation pump works by using the horizontal thrust along the direction of the pump axis generated by the rotation of the impeller, so it is also called a horizontal axial flow pump. Mainly used in the evaporation of diaphragm method caustic soda, phosphoric acid, vacuum salt production, lactic acid, calcium lactate, alumina, titanium dioxide, calcium chloride, ammonium chloride, sodium chlorate, sugar, molten salt, paper, waste water and other industries. Concentration and cooling, in order to improve the production capacity of the equipment, increase the heat transfer coefficient of the heat exchanger for forced circulation. Therefore, it can also be called an axial flow evaporative circulation pump.
Forced Circulation Pump,Circulation Pump,Recirculating Pump,Centrifugal Pumps
Jiangsu Qiantu Trading Co., Ltd. , https://www.qiantupump.com