1, in order to provide easy access for most people, in some sections of the urban area will be set to several zero parking spots, but the mobile LED advertising car drivers must pay attention to see the zero hour two words, zero hour It is not possible to park mobile LED advertising vehicles for a longer period of time. And in the case of emergency needs, it is necessary to stop at zero hours, then the warning light should be turned on in order to be able to leave the place of zero hour parking anytime, anywhere.
2. The lanes on urban tunnels and viaducts are relatively narrow. If the mobile LED advertising vehicle changes its line during driving, it is very easy to cause the danger of a traffic accident. Therefore, driving in the tunnel and on the section of the viaduct is prohibited. When driving to these roads, the speed is also limited to a certain range. Please be sure to observe the traffic rules and avoid eating tickets.
3. The most densely populated areas in all first-tier and second-tier cities are in bus stations and subway stations. Office workers and pedestrians cannot travel to these places. This is also an excellent advertising site for mobile LED advertising vehicles . However, because of the relatively large number of people flowing in these areas, it is also the most unfavorable area of ​​traffic. In general, it cannot stop at any time. If you are caught by the traffic police to stop your parking, as long as the relentless ticket, and may also be photographed by the electronic eye oh. Although the location of the advertising here is more appropriate, it is still not to try the insurance.
4. At some special crossroads, avoiding the green light that comes out in front of you is also not able to make a left turn. Therefore, when you move an LED advertising vehicle into the crossroads of a strange city, you must first observe the surrounding area. On both sides of the traffic signs, do not see the green light turn on after the casual hit, this will not only be affixed to the ticket, but also is not responsible for their own and others' safety.
All Metal Casting parts need to have wax molds to produce the product. Only a mold with high production precision and reasonable structure can ensure the production of qualified Investment Casting Parts. Therefore, the production of molds is very critical for investment casting. First of all, we must ensure the accuracy of the molds. Only high-precision molds can produce high-precision products. It is also necessary to consider the position of the gate to ensure the balance of the wax flow, the convenience of subsequent removal of the gate, and the importance of the size of the gate position; and the rationality of the mold structure, only the design is reasonable. The mold structure can ensure efficient production and long mold life.
SCZY has its own mold manufacturing workshop, and the overall accuracy of the mold can reach ±0.02mm. Before manufacturing the mold, we will systematically analyze the mold structure and gate position to ensure that the produced mold can produce products accurately and efficiently.
Casting Mold Development,Investment Casting Mold Development,Casting Mold For Investment Castings,Casting Mold
Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com