One, Daktronics interpreted the LED display outdoor surface stickers and inline lamps that have more advantages The following Daktronics for everyone to read LED full color display surface mount technology, outdoor patch products to SMD3535-based lamp beads 2016 has begun Large-scale crazy into the outdoor full-color LED electronic display market, and the majority of manufacturers continue to expand the large-scale market for outdoor patch products, the monthly sales of hundreds of thousands of square meters. With the advent of smd3535, there are still many customers in the country who have questions? Outdoor LED screen in the end is the surface of the good or the line of good? What are the different among its?
Second, Daktronics will answer your questions about the advantages and disadvantages of outdoor patch and DIP display. Now, technical engineers from Shenzhen Daktronics Technology Co., Ltd. will give you a simple comparison to help you understand better. First of all, the outdoor surface-mounted LED electronic display is relatively inline with respect to the in-line product, which improves the lighting angle and consistency, and the outdoor surface mounting production process is not very complicated. As long as the placement machine adjusts the machine and the solder paste, And SMD temperature control is good, basically there is no quality, the problem has raised the production efficiency, more importantly is to reduce the cost. In the past, the high cost was an important factor that SMT could not replace in-line insertion. At the beginning of research and development, due to the low brightness of the SMD chip, and the waterproof, moisture-proof, and UV-resistant features that cannot meet the requirements of outdoor harsh environments, outdoor full-color, LED display is a direct line of the world. Can be applied indoors, with the progress of LED chip technology and LED packaging technology, SMD's brightness and protection levels have been able to meet the needs of outdoor applications, and compared to the inline, it is even more technical. Indeed,
2, the shortcomings of outdoor patches, patch display in the brightness and resistance to high and low temperatures far better than the light, if in the East Third Province estimated that it will take some time to precipitate, our R & D there are many roads away, in the climate The service life of the very cold northeast SMD lamps is definitely greatly reduced. After the hot and cold expansion, the colloids and the lamp cups will basically fall off. This virtual player will not sell the lights, but it will be sales experts, not sales engineers.
3, outdoor SMD LED screen natural advantage of a wide viewing angle, good light distribution, good mixing, high contrast. The outdoor surface mount LED display has a wide viewing angle of more than 140 degrees in the horizontal and vertical directions, and the brightness is consistent at any angle, and has a better color display effect. Moreover, since the design structure is three-in-one and the size of the full-color surface sticker is small, the light emitting area is small, and the black area is large, which improves the contrast of the LED electronic display screen. The three chips are close together and are ideal for close-up viewing. Compared to the DIP electronic display, the outdoor surface-mount electronic display is free of glue, and the product is thinner, lighter, and easier to install. Suitable for rental companies, on-board screens, and mobile media; post installation or wall installations reduce the stress on the steel structure.
Third, the inline lamp display and the advantages and disadvantages of the patch 1, line full-color LED electronic display, generally divided into DIP546-DIP346-DIP246 - the market has triple-inserted, but the market is still 346 dominance The advantages of the in-line plugging are good sealing, high brightness and strong adaptability to the environment. It is suitable for long distance viewing. However, the viewing angle is slightly smaller, the color uniformity is slightly inferior, and the production process is slightly complicated. High process costs, the current performance of all aspects of the full-color display made by the line lamp is very mature, and the stability is definitely better than the line-in, so the outdoor full-color LED electronic display surface is good or good ? Therefore, when customers select these two screens, they should consider the budget and the requirements of the use of the environment. The best choice is the best solution. Compared with the author himself, it is more optimistic about the outdoor surface sticker screen, SMD LED display will be the best alternative product of outdoor line, this trend is increasingly recognized by the industry, to overcome the technical difficulties to become LED display companies compete Hot spot.
Fourth, product summary:
The surface-mount full-color LED electronic display has a large viewing angle, good light distribution and color mixing, delicate images, and a medium brightness level, and is suitable for large-scale automated production.
However, the failure rate and decay rate are high, and their adaptability to harsh environments is poor. However, the surface affixed to the color reproduction, color consistency, uniformity, viewing angle, the overall picture effects, etc.
Second, Daktronics will answer your questions about the advantages and disadvantages of outdoor patch and DIP display. Now, technical engineers from Shenzhen Daktronics Technology Co., Ltd. will give you a simple comparison to help you understand better. First of all, the outdoor surface-mounted LED electronic display is relatively inline with respect to the in-line product, which improves the lighting angle and consistency, and the outdoor surface mounting production process is not very complicated. As long as the placement machine adjusts the machine and the solder paste, And SMD temperature control is good, basically there is no quality, the problem has raised the production efficiency, more importantly is to reduce the cost. In the past, the high cost was an important factor that SMT could not replace in-line insertion. At the beginning of research and development, due to the low brightness of the SMD chip, and the waterproof, moisture-proof, and UV-resistant features that cannot meet the requirements of outdoor harsh environments, outdoor full-color, LED display is a direct line of the world. Can be applied indoors, with the progress of LED chip technology and LED packaging technology, SMD's brightness and protection levels have been able to meet the needs of outdoor applications, and compared to the inline, it is even more technical. Indeed,
2, the shortcomings of outdoor patches, patch display in the brightness and resistance to high and low temperatures far better than the light, if in the East Third Province estimated that it will take some time to precipitate, our R & D there are many roads away, in the climate The service life of the very cold northeast SMD lamps is definitely greatly reduced. After the hot and cold expansion, the colloids and the lamp cups will basically fall off. This virtual player will not sell the lights, but it will be sales experts, not sales engineers.
3, outdoor SMD LED screen natural advantage of a wide viewing angle, good light distribution, good mixing, high contrast. The outdoor surface mount LED display has a wide viewing angle of more than 140 degrees in the horizontal and vertical directions, and the brightness is consistent at any angle, and has a better color display effect. Moreover, since the design structure is three-in-one and the size of the full-color surface sticker is small, the light emitting area is small, and the black area is large, which improves the contrast of the LED electronic display screen. The three chips are close together and are ideal for close-up viewing. Compared to the DIP electronic display, the outdoor surface-mount electronic display is free of glue, and the product is thinner, lighter, and easier to install. Suitable for rental companies, on-board screens, and mobile media; post installation or wall installations reduce the stress on the steel structure.
Third, the inline lamp display and the advantages and disadvantages of the patch 1, line full-color LED electronic display, generally divided into DIP546-DIP346-DIP246 - the market has triple-inserted, but the market is still 346 dominance The advantages of the in-line plugging are good sealing, high brightness and strong adaptability to the environment. It is suitable for long distance viewing. However, the viewing angle is slightly smaller, the color uniformity is slightly inferior, and the production process is slightly complicated. High process costs, the current performance of all aspects of the full-color display made by the line lamp is very mature, and the stability is definitely better than the line-in, so the outdoor full-color LED electronic display surface is good or good ? Therefore, when customers select these two screens, they should consider the budget and the requirements of the use of the environment. The best choice is the best solution. Compared with the author himself, it is more optimistic about the outdoor surface sticker screen, SMD LED display will be the best alternative product of outdoor line, this trend is increasingly recognized by the industry, to overcome the technical difficulties to become LED display companies compete Hot spot.
Fourth, product summary:
The surface-mount full-color LED electronic display has a large viewing angle, good light distribution and color mixing, delicate images, and a medium brightness level, and is suitable for large-scale automated production.
However, the failure rate and decay rate are high, and their adaptability to harsh environments is poor. However, the surface affixed to the color reproduction, color consistency, uniformity, viewing angle, the overall picture effects, etc.
The special aluminum nose strip material for masks is different from the ordinary aluminum alloy product material. This material has the advantages of anti-rust, anti-corrosion, and high brightness. The surface of the aluminum strip has uniform hole penetration, good straightness, no deformation, stable size, high strength, and good toughness. It can be continuously bent with bending equipment. It has excellent adhesion with various glues, excellent sealing effect, not easy to leak, and long service life, so the demand is large. Commonly used in: N95, N100, R95, P95, 9000, FFP2, FFP3 and other types of masks.
Aluminium Nose Strip,Metal Nose Clip,Metal Nose Strip,Aluminum Nose Wires
Dongguan Hongtao Plastic Hardware Co., LTD , https://www.twisttiemanufacturer.com