China's lighting design development has only been more than 20 years. Compared with developed countries such as Europe, America and Japan, the industry base is relatively weak. However, in recent years, with the successful hosting of the world-renowned international conferences such as the Olympic Games, the Asian Games, and the World Expo, as well as the rapid development of China's real estate industry and urbanization, the lighting design industry has quickly become familiar. From neglecting lighting design to over-illumination design, it took only a decade.
Due to the irrational lighting design, there is a huge waste of electricity. Not only that, excessive lighting design may also cause light pollution, which makes people feel dizzy, anxious, etc. It can be described as hurting and hurting! Ren Mei, chief designer of Zhimei Lighting, believes that vigilance over lighting has gradually become the consensus of designers and builders.
To eliminate excessive lighting, the lack of professional professionals who need to improve the design is the main cause of excessive lighting design. As a director of the China Lighting Designers Union, Ren sees the professionalism of talents in the development of the industry. As the domestic lighting design industry is in the early stage of development, many university graduates have invested in this new industry. Although this brings fresh blood and sufficient manpower, there is no lighting design profession in China. The division is also very small, and more lighting designers are transforming from fine arts, architecture and other lighting design.
According to the introduction of Zhimei Lighting Designer, he has also been exposed to some new graduates. Although these new forces have their unique design concepts and artistic background, they lack professionalism and deep understanding of the industry. Their lighting design is too artistic, and ignores practical issues. Some newcomers, in order to achieve visual effects, enhance brightness, blindly use lights to build up, resulting in a lot of power waste; there are some designs, the use of high-pressure spotlights, not only increase costs, waste of electricity, but also cause local temperature rise High, it poses a safety hazard, and may even cause light pollution to affect people's health. Lighting design is an art, but it is a science. Art seeks beauty, science seeks truth, lighting design not only requires brightness, color temperature, primary and secondary, melody beauty, but also must be compatible with illumination, electrical, control, energy saving. Without a professional design, it is easy to get rid of the end, and thus excessive.
To avoid over-illumination, the suitability of design is the key to the stable development of China's lighting design from the early blind development period. The current lighting design emphasizes energy efficiency and environmental protection. The "Architectural Lighting Design Standards" clearly stipulates the unit power density of space lighting. If the lighting load per square meter exceeds the corresponding illuminance specified in the regulations in the design plan, the energy consumption of this design case will exceed the standard and will not pass. . In this regard, lighting designers need to apply the principle of appropriateness, the most reasonable design, to achieve the required standards by selecting lighting equipment with higher luminous efficiency, or changing the lighting method.
The suitability of lighting design may be interfered by customers in the implementation, but as a professional lighting designer, it is necessary to adhere to the professional concept and assume the responsibility of guiding the market to mature development. For example, the landscape lighting in some remote suburbs does not need to be so bright, but the local leaders will ask for highlighting; in the brighter environment of the downtown commercial street, there will be a law of comparison. If you blindly meet the needs of customers, it will cause huge waste of funds and energy due to excessive lighting. From the perspective of the benign development of the entire industry, it is very meaningful for designers to adhere to the energy-efficient road of lighting and adhere to the principle of suitability. Try to use the least number of lights to express the most perfect effect. When choosing a lighting product, you should choose the most suitable one according to your needs. Grasping the suitability, we can ensure that the lighting design meets the green environmental protection standards, avoiding excessive, not only achieving energy efficiency in terms of energy efficiency, but also avoiding light pollution to the human body.
600-800KG/h Production Line
As a first and pioneer Powder Coating Machinery manufacturer in China, was founded in 1988.
Our R&D team developed OPTIMIZED SERIES" which comes in two type(E type & D type) and NEWTEC SERIES.Including lab production line,Premixer,extruder,cooling belt and mill system. The products can satisfy the capacity from 10kg/h-1000kg/h.
Our Advantage & Service:
-Technical Support Online Service Provided
We can supply all Powder Coating Raw Materials( polyester resin, epoxy resin, barium sulfate, gloss agent and so on) in the formulation.
According to customer's requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers' requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage):
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
Powder Coating Equipment,Powder Coating Machine For Sale,Electrical Installaion Powder Coating Plant,Powder Coating Machine Factory
Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com