Jinling Drying Co., Ltd. Developed Two Kinds of Vibration Dryers on the Market

A dryer is a mechanical device that uses heat energy to reduce moisture in a material and is used to dry objects. The dryer vaporizes the moisture in the material by heating to obtain a solid material with a predetermined moisture content. The purpose of drying is for material use or further processing needs.

As the most powerful enterprise in the domestic drying industry, Changzhou Jinling Drying Equipment Co., Ltd. of Jiangsu Province has developed and developed hot plate vibration dryers and LZG spiral vibration dryers according to market demand.

Hot plate vibration dryer is the ideal equipment to replace the oven, has been rated as high-tech products in Jiangsu Province, and declared a national patent. The material is continuously fed through the top metering port, passes through a plurality of stacked hot plate drying plates, heat and mass transfer is fully performed, and under the action of exciting force, rolling motion is performed, and the finished product is discharged from the bottom.

The device has a large heat transfer area, high thermal efficiency, low energy consumption, disk diameter, disc layer, single layer temperature, in and out of material time and layer temperature, vibration frequency and amplitude can be adjusted, continuous closed operation, optional hot air compensation Heat and dry, improve performance, optional PLC touch automatic control system, optional quick release device, cleaning more convenient, and the disk is not easy to residual materials, in line with GMP requirements, suitable for the drying and cooling of better fluidity of the powder and granular materials .

LZG series spiral vibration dryer is the ideal equipment to replace the traditional box dryer. The wet material enters the spiral bed from the top feeding port, and jumps from the top to the bottom along the spiral bed, and the hot air that rises from the bottom of the spiral bed transfers heat and mass to the bottom. The residence time of the material in the bed can be adjusted. The continuous feeding and discharging materials are suitable for the assembly line operation, and have no damage to the surface and shape of the material. It is suitable for the drying of granular, short strip and spherical materials.

Color Wrap Film

Color Wrap Film for car body wrapping have gloss,matte, metallic,chrome, chameleon,diamond,holographic,brushed finish and all car color wraps with imported Ishland glue and diamond air channels with good stretchable,very good to install and last long time outside over 3-5 years.


1.Water Resistant and UV Protected.
2.Invisible Air-Release Channel, easily get rid of bubbles during installation.
3.Strong self adhesive, eliminate bubbles, peel and stick application.
4.Gloss and smooth finish.
5.Stretchable with heat.
6.Easy to clean with soap and water.
7.Long lasting for approximately 5 years indoor use and 3 years outdoor use.
8.It can also be applied onto most smooth painted or metalized surface such as cell phone, laptop, home appliances, table and even cabinet and much more.

Installation Tips

1. Clean off any dust, dirt or wax or other things before installation.

2. Measure the amount of protective film needed for the part to be fixed.

3. There is a transparent protective film on the surface which must be peeled off before use.

4. With a hair dryer, let the film be flexible and reduce wrinkles.

5. Even though it is waterproof, it cannot be completely submerged in water.

6. After assembly, please leave the car under the sun within 48 hours or do not wash the car in the meantime. Do not let the car stickers touch the water after installation for 48 hours.


Matte Car Wrap,Car Wrap Film,Car Wrapping Film,Gloss Car Wrapping,Car Wrapping Vinyl

Guangzhou Fuyulai Technology Co.,Ltd , https://www.fuyulaifilm.com

Posted on