(1) Overview
Tongshan molybdenum mine area is located in Zhenjiang, Jiangsu Province, Jurong county territory.
Since the local part of the mine contains carbonaceous shale , which affects the quality of some molybdenum concentrates (18 to 40% of molybdenum concentrate grade), a molybdate workshop is built to make molybdate directly into unqualified molybdenum concentrate. Sales.
The mine was designed in 500 tons/day in 1959 and partially constructed. According to the final report of the geological mining geological team in 1966, submitted by the scale of the reconstruction of 250 tons / day ore dressing plant and put into operation in July 1968.
The mining was started in the early stage of mining, and the mining method was shallow hole mining method. The Pingyukou is 120 meters away from the original ore warehouse of the ore dressing plant and is manually transported to the original mine silo.
Water is taken from groundwater and surface water 4 km away from the ore dressing plant, and 50% of the tailings return water.
The power comes from the East China Power Network. A 35 kV high-voltage line was set up from Nanjing Zhongmei Village to the mining area. The capacity of the total depressurization substation in the mining area is 1000 thousand volt-amperes, and the installed capacity of the concentrator is 465 watts.
(two) process
1. The ore is a skarn type copper-molybdenum deposit, and the ore body is produced in the contact zone of granite , diorite and limestone. The ore type is copper ore (including copper grade 0.8-1%, molybdenum grade 0.01~0.02%); molybdenum ore containing molybdenum grade 0.08~0.12%, copper grade 0.03~0.05%); mixed ore (containing copper grade 0.05%, Molybdenum grades are 0.05%).
The main metal minerals chalcopyrite, and small amounts of molybdenite pyrite, magnetite, pyrrhotite, bornite, covellite, chalcocite, sphalerite like. The gangue minerals mainly include garnet , followed by actinolite, calcite , quartz , and chlorite.
Chalcopyrite has a coarse grain size and is a block-like or scatter-like aggregate. 60 to 80% of the molybdenum ore is a sheet-like aggregate embedded in the gangue cleft, and a few are present as separate lamellae. And there is a phenomenon of symbiosis with chalcopyrite.
The ore contains 2% water, the ore has a true specific gravity of 3.4, and the pseudo-specific gravity is 2.12, which is an extremely hard ore.
2. Process Flow Broken: Two sections and one closed circuit, the original ore size is 350~0 mm, the final product size is 16~0 mm, and the total crushing ratio is 21.9.
Grinding and floating: for a closed-circuit grinding, grinding fineness -200 mesh accounted for 65~70%. When selecting copper ore, it is a rough selection, secondary selection, and secondary sweeping. The process flow is shown in Figure 1 below.
[next]
When copper or molybdenum ore is selected, the copper and molybdenum ore are selected by rough selection, secondary rough selection and secondary sweeping. The mixed concentrate is stirred and removed, and the separation of copper and molybdenum is once rough selection, six selections and one sweeping. The process flow is shown in Figure 2 below.
The choice of molybdenum ore is the same as the copper-molybdenum process, except that the tailings are separated and the final tailings are separated.
Dehydration: copper concentrate is concentrated, filtered in two stages of dehydration, concentrate water 14%, molybdenum concentrate is sedimentation, centrifuge dehydration in two stages, concentrate water 4%. [next]
(III) Main equipment of the concentrator (below )
Leisuwash S90 Vehicle Wash System
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment.
Leisuwash S90 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Leisuwash S90 Car Wash Machine is an entry level car wash unit, but you won`t find any low grade components and no cost cutting on the expense of quality. Each Leisuwash S90 is built by Leisuwash employees in accordance with our usual quality standards, the low price is achieved by high standardization and the use of proven technology. The Leisuwash S90 is for clients that need a wash machine at a competitive price with higher ROI.
Auto Car Wash Machine,Automatic Leisuwash S90 Series,Leisuwash S90 Series Car Wash Machine,Automatic Leisuwash S90 Series Car Wash Machine
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdtouchfreecarwash.com