Toxic gas alarm, used to detect toxic gases in the atmosphere, the concentration is expressed in ppm (parts per million), and the oxygen is expressed in profit and loss (% VOL). The following editor will introduce the installation method of toxic gas alarm.
(1) The core component of the toxic gas detector is a gas sensor. It consists of a platinum wire coil coated with alumina and a binder, and its outer surface is attached with rare metals such as platinum and palladium. Be careful when installing to avoid falling Bad probe.
(2) Installation height of toxic gas alarm: Generally it should be 160-170cm, so that maintenance personnel can perform routine maintenance.
(3) Toxic gas alarm installation location: Because it is a safety instrument, with sound and light display functions, it should be installed in a place where workers can easily see and hear in order to eliminate hidden dangers in time.
(4) Toxic gas alarm installation environment: there must be no strong electromagnetic fields (such as high-power motors and transformers) around the instrument that affect the operation of the instrument.
(5) At the same time, the installation position of the indoor probe should also be different according to the density of the measured gas. When the density of the measured gas is less than the density of the air, the probe should be installed 30cm away from the roof and facing downward; otherwise, the probe should be installed 30cm away from the ground and facing upward.
The above is the introduction of the installation method of toxic gas alarm, everyone can understand it.
Metal Anodizing
Anodizing is an electrochemical finishing process that results in a durable and corrosion-resistant protective finish. In particular, aluminum is well-suited for anodizing treatments.
In contrast to other finishing processes that apply the coating or finish to the substrate, the anodizing process leverages the aluminum oxide layers that naturally occur in aluminum and increases them in thickness to form a fully integrated surface finish. Depending on the specifications of the anodizing project, the oxide layers can be thickened minimally or to more than 100 times their original thickness.
Advantages of Anodizing
1.Improved corrosion and wear resistance
2.Good aesthetic
3.Can achieve a variety of colors
4. Clear finish options are also available
5.Lower cost compared to Powder Coating
6.Extremely durable,hard,abrasion-resistant,and long-lasting.
7.Recyclable
Stainless steel, aluminum, titanium alloy ,sheet metal, brass, copper etc can be done by anodizing with different colors, we have many parts that ever did, so please let us know what you are looking for , we can do the CNC Machining for the part manufacture and 2nd process anodizing surface treatment.
Metal Anodizing,Anodized Aluminum Sheet,Metal Aluminum Anodized,Anodizing Aluminum
Suzhou FCE precision electronics Co., LTD , https://www.sjfukeyifcesz.com