1, the adjustment of the machine, in the installation, first of all to adjust the machine performance, this process must be patient and serious, check the machine is not a dust and used iron scrap, etc., to carry out the necessary clean-up to reduce Late troubles.
2, the slider stroke adjustment, pay attention to check the thickness of the mold and pay attention to check the ratio of the upper and lower modules is not normal, the module is normally controlled in the trip line switch point, this must pay attention.
3, the adjustment of the travel module, which is to adjust the upper point of the module, when the module reaches the highest point, set the switch, and set aside the slider's stop position, and also to slow down Modules to better protect the machine and mold.
4. The adjustment of the gap is mainly to measure the distance between the upper module and the lower module. The specific gap setting is determined according to the folded plate.
5, the angle adjustment, the adjustment of this angle has a certain relationship with the product, in general, folded 90 ° mold, then the middle angle must be greater than the two sides of the angle, then its elasticity can be adjusted according to the screws, in the bending In the meantime, the pressure gauge can be used to adjust the pressure and prevent the mold from chipping.
Colloid Mill is a machine used in the disintegration of solid particles or droplet size of a liquid present in suspension or emulsion. The machine consists an inlet (which is subjected to a tremendous shearing action that effects a time dispersion of uniform size) and an outlet. Colloid mill works on the rotor-stator principle. The equipment breaks down materials by forming dispersion of material in a liquid. Shearing takes place in a narrow gap between a static cone (the stator) and a rapidly rotating cone (the rotor). To reduce wear, the rotor and stator are constructed using 3Cr13 food grade stainless steel.
Small Peanut Butter Making Machine,Nutella Paste Grinding Machine,Peanut Butter Dispensing Machine,Peanut Paste Milling Machine
Henan Gems Machinery Co.,Ltd , https://www.hngemsmachine.com