After the oil of the bulk feed truck has been used for a period of time, due to some of its own impurities caused by the operation of the machinery and external contamination, some of the parts that are operated will have worn out metal shavings, and When the parts are subjected to some corrosive effects, they form metal salts that eventually deteriorate the oil in the bulk feed carrier. Some drivers are usually busy when transporting goods, and the knowledge of this piece is not enough, then it is prone to oil deterioration and accelerated aging, resulting in deterioration of the oil of bulk feed carriers. Can not get a good lubrication performance, which will accelerate the vehicle parts of the various parts of the degree of wear. Therefore, every driver of a bulk feed carrier should have a better understanding of and knowledge about the proper use of vehicle oil, and he must also be able to change the oil.
1, after a long period of driving the bulk feed carrier, you can remove the oil, drop it and rub it in your hands. If there is some abnormal taste, then it proves that the oil has gone bad.
2. Take a few drops of the extracted oil to the litmus test paper, and then carefully observe some changes in the test paper. If the litmus paper has turned red, then you need to replace the oil. Now.
3. If the bulk feed truck is in use, there are obvious lubrication conditions or there are many bubbles, and the foam will not disappear so easily, it proves that the oil in the bulk feed truck is already With the incorporation of water, the vehicle's engine oil deteriorated.
Usually when driving a bulk feed carrier, it is also possible to determine whether the engine oil has deteriorated through the degree of oil consumption. If the oil is mixed with water or diesel, the degree of consumption of the oil will increase or decrease. The emergence of these problems proves that the oil of the bulk feed truck has deteriorated, and it is necessary to replace the new oil immediately. .
We factory specialize in tin components/accessories, tinplate, printed tinplate, TFS sheet, Printed TFS and packages. The packages with capacity from 0.1L- 25L is widely used for packing aerosol, chemical, engine oil, glue, paint, solvent, beverage, food, milk powder , olive oil, etc. Accept coating and mold customization. Fast delivery.
Our factory enjoy the most complete existed shape and design for tinplate chemical packages among the Chinese suppliers. Our containers are UN approved and ISO certified, we are the suppliers for some world famous brand including Akzo Nobel and PPG.
The advanced full automatic lines, the prime material, the perfect printing service and 22 years experience form the first grade level quality for our packages. Our products are exported to 65 countries.
If you are interested in our products, be free to contact us, your any inquiry at any time is warmly welcomed, we will reply you at soonest time, thanks.
Paint Can Plug,Tin Can Components,Lid Ring And Bottom,Triple Tight Lid Ring Bottom
Jiangsu Fast Pack Co., Ltd , https://www.fastmetalpack.com