For many newcomers who just got on the road, they often pay attention to the driving skills and maintenance of the car, and often do not pay much attention to how to stop. As everyone knows, "the machine is not bad, it is bad." The car is the same. If you do not abandon some of the bad habits of parking, it may accelerate the static wear of the vehicle. Here are some tips for parking.
Select location: Try to avoid parking on the ramp
Parking, it is best parked on the level of the road. Due to the level of the road, all parts of the car are in a balanced state. Try not to force the four wheels differently. The need to remind the owner is that whether it is automatic transmission or manual transmission models, should try to avoid parking on the ramp; if you can only stop on the ramp, just happens to be automatic models, need to remember the following methods of operation: parking → hanging neutral → Pull the hand brake → loose the brake and then apply the brake → hang the P block. In addition, objects such as bricks or blocks should be placed under the wheels to reduce the pressure on the mechanical system.
In addition, when parking on the side, you should adjust the mirror on the right side down to see the situation near the rear wheels and avoid getting the wheels on the road and other objects. If the side of the tire is injured, bulges, etc. may occur. If you hit the hub, it will also affect the various parameters of the suspension. If you are not parking in the limit, it is best to leave a distance of about 10 cm between the teeth.
Directions: Damaged Power Pump in Place
Many newcomers are not very skilled because of the technology. When they are parked, they often prefer to stop at the same place. This is actually a bad habit that needs to be removed. When driving in the same direction, the pressure in the power steering pump is also much greater than the pressure in the direction of movement of the vehicle. In particular, the off-road vehicles with large tires often suffer from serious damage to the booster pump. The correct method is After the car moves, turn the steering wheel and remember the key points of "the movement direction of the car and the stop direction of the car."
In addition, try not to "kill" when playing the direction, because the greater the angle of play, the higher the oil pressure. It's enough to go back a little bit in the direction of death. A little bit is enough.
There is still a point to be reminded when playing the direction, that is, when parking must be turned back after the positive direction, if the steering wheel does not return to the positive, the wheels will be unable to return with the steering lever, while the steering wheel gear and steering lever The racks are also in a stressed state. Over time, these parts will accelerate aging or deformation. In addition to the loss caused to the steering system, the steering wheel will not return to normal, and the tires and suspension system of the vehicle will be worn.
Hanging reverse gear: After the car stops and then hangs the reverse gear
Need to hang reverse parking, but many novices will open the manual transmission models will find that in the rapid shift gear before and after moving the vehicle, often issued a "click" sound, which is reverse gear, mainly due to the car It was caused by a reverse gear without stopping.
As we all know, the forward gear of the manual gearbox is equipped with a synchronizer. The role of the synchronizer is to mesh the gears to achieve a consistent rotational speed. The reverse gear is not designed with a synchronizer, and it is a straight gear structure. When the car is not stopped, the reverse gear is hard and fast and two gears with different rotational speeds and no synchronizer are plugged together.
In addition, some car owners will stop the car directly with a handbrake before the intersection changes light or when it stops. This will also increase the wear of the car for no reason. Handbrake is often used for braking, the handbrake pull wire will be stretched and deformed, the brake pads will become thinner
Aluminum Oil Catch Can,Aluminum Fuel Line Fittings,Fuel Line Fittings,Fuel Connector Fitting
Yihua Precision Machining Co, Ltd. , https://www.yhmachining.com