Fracture shield samples were taken for chemical composition inspection. After checking the chemical composition, wP ≤ 0.06, wS ≤ 0.06, wSi ≤ 1.0, all within the qualified range, excluding the reason for the composition.
Therefore, the preliminary judgment of the casting defect is the main reason for the front shield fracture. The internal shrinkage holes in the castings seriously affect the intrinsic quality of the castings, resulting in a reduced service life. For this reason, we analyze the reasons in depth.
(1) The bottom of the front shield outlet is a hot section, and the side riser is far from the bottom of the outlet. The feeding of iron liquid is limited here. According to the experience, the feeding efficiency of the riser is low, usually about 20%. The result is that the internal structure of the hot junction below the outlet is not dense and there are shrinkage defects.
(2) There is a lack of overflow at the top of the outlet of the front guard plate, and the low-temperature molten iron and gas in the early stage of casting cannot be discharged in time, causing casting defects such as blowholes.
(3)Environmental influences, moisture absorption of the core, generation of gas pores during pouring, and relative humidity of the production site of 70% to 80% according to the hygrometer.
(4) The arc below the outlet is small, only R2mm, the smaller arc leads to the formation of sharp angle sand in the production of core, so that here the sand refractoriness decreased, easy to produce sticky porosity defects.
QC12K/Y Hydraulic Shearing Machine
This series is swingBeam type plate shears, blade clearance uniformity adjustment is convenient and it with stepless adjustment function
DML cnc Shearing Machine is the fruit of a project resulting in our bringing together 'Made in China' creativity, design and
innovation with all the reliability of the best Chinese and European component range. The result is a perfect mix of avant-garde and efficient technology, guarantee of an extremely solid machine, precise with its cuts and of extremely high quality. cnc shearing machine is available with a broad series of standard equipment but it is possible, at any moment, to add optional equipment according to requirement. The robust monolithic structure is a guarantee of great stability and precision of cut. Even the design is perfected according to criteria of maximum functionality and efficiency.
Standard Equipment:
2. Portable foot pedal is eligible for single and automatic cutting.
3. ESTUN E21s NC controller System.
4. NC controlled motorized backgauge system.
5. 600 mm motorized back gauge system with 0.1 mm accuracy.
6. Front support arms with T slot, ruler and flip stop.
7. Squaring arm.
8. Scales with metric and inches.
9. Cutting line illumination and shadow line.
10. Central lubrication system.
11. Front finger protection guard appropriate to CE norms, 1 m left side collapsible and switch protected.
12. Rear sliding plates.
13. Front sliding plates with ball bearings on the table.
Qc12K/Y Hydraulic Shearing Machine,Hydraulic Shearing Machine,Guillotine Shearing Machine,Hydraulic Sheet Metal Shear
Jingjiang lifeng machine tool manufacturing CO.,ltd , https://www.dmlcnc.com