Cooling 130-420kW
Application areas
Industry process, precision,traditional manufacturing, food processing, government project, pharmacetical.
Characteristics
29 sizes available ranging from 130 kW to 2500 kW cooling capacity.
 Acting as multi-function unit such as cooling, heating, sanitary hot water separately or simultaneously.
Wide application as hotel, apartment, villa, factory, shopping center, office building, school, etc.
Semi- hermetic screw compressor for the whole range. Each compressor is equipped with a crankcase heater and a built-in electronic
protection with temperature sensor located directly in the motor winding and on the discharge line.
The refrigerant circuit is complete with sight glass, filter drier, high and low pressure gauges, solenoid valve, electronic expansion valve, high and low pressure switch.
Shell and tube dry expansion type condenser, factory insulated with flexible close cell material.
 Â
Shell and tube evaporator, higher efficiency less water consumption, easy maintenance and cleaning, factory insulated with flexible close cell material.
The electric panel consists of compressor breaker, compressor contactor, phase sequence relay, control circuit breaker, microprocessor control with function display.
LCD display, touch screen control panel as standard.
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
An infinitely variable capacity control system that is capable of exactly matching the demand requirement of the system is to be supplied. This system is to provide precise and stable control of supply water temperature over the complete range of operating conditions.
Optional
Desuperheater as optional.
Electronic controller with BMS system.
Technical Data
* Performance values refer to the following conditions:
Condenser water inlet/outlet temperature: 30ºC/35ºC, evaporator water inlet/outlet temperature: 12ºC/7ºC.
   Â
** Noise level measured in free field condition at distance of 1 meter.
Purpose and Characteristics:
â—† Design Speed: 80m/min
â—† Effective width: 1400mm-2200mm
◆ Corrugated roller:φ280mm
â—† Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transmission. separate power.
â—† Corrugating roller, pressure roller and glue roller by pneumatic adjustment.
â—† Cardboard transmit adopt vacuum suction method, with wind control system. keep flute profiles stable of the lower-roller in the condition of running up.
Bearing of corrugated and pressure roller adopt high temperature lubricate grease.
â—† Glue parts auto supply glue circularly.
◆ The upper-lower corrugating roller are made of 48CrMo high quality alloy steel, after heat-treatment. The hardness HRC58°-60°,the surface be grinded.
â—† The glue part surface are treated by special mesh snicked and chromeplated.
â—† Motorized or manual glue width dividing to match the paper width.
â—† Glue part can be running independently or non-independently while stopped. Adopt main motor frequency conversion control. (optional)
280S Fingerless Type Single Facer Machine
Corrugation Machine,280S Fingerless Type Single Facer Machine,Fingerless Single Facer Corrugated Machine,Single Facer Line
JIALONG PACKAGING MACHINERY CO.,LTD , https://www.jlcartonmachine.com