China Pet Bottle Blowing Machine Semi Automatic Blow Moulding Machine

Model NO.: KMR-880
Raw Material: PET
Automation: Non-Automatic
Certification: ISO9001:2008
Bottle Size: 2-5L
Delivery Time: 30days
Specification: ISO9000: 2001
HS Code: 8422301090

Type: Plastic Bottle Blowing Machine
Making Method of Parison: Heating and Blowing
Computerized: Computerized
Capacity: 550bph(5L)
Machine Material: SUS304/316L
Trademark: Accurate
Origin: Wenzhou, China

CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle ,mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc.

Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate .Â

Main parameter:
Model	CM-8Y
Container	Product material	PET
	Volume	0.1L-2L
	Theoretical output	1200-1600PCS/H
	Preform length	15mm-310mm
	Preform inner diameter	Ï†5mm-38mm
Moulding	Max.mould plate Dimenstion(L x W)	350x380mm
	Max.mould thickness	180mm
	Clamping force	45KN
	Mould opening stroke	160mm
Machine size and weight	Main machine (L x W x H)	160x60x161cm
	Main machine weight	500Kg
	Heater (L x W x H)	187x63x145cm
	Heater weight	250Kg
	Power	17.5kw

Â HP air compressor:

Air compressor	Unit	1.2M3/min 30KG
Volume	M3	1.2
Pressure	Kg	30
Speed	r/min	850
Power	KW	15
Overall Dimension	mm	200011001600
Weight	kg	620

Â Air Cooling Drier:

Refrigeration Air Dryer

Unit

2.0M3/min 3.0Mpa

Flow capacity

Nm3/min

2.0

W.P

Injection Charger Base Accessories

Iphone charger base Iphone charger plastic base

The design theme of the accessories for the injection charger base is the product design and mold design of the universal charger base, which is designed for the production of injection mold. Plastic parts
The preliminary analysis of the structure shows that the sprue and the sequence type, the structure and the adoption of a two-cavity mold are due to the large area of plastic parts. Due to the structural characteristics of plastic parts, it needs to use inclined sliding traction mechanism. The specific design process is as follows: first, the performance analysis of the plastic injection molding process. This includes analysis of the structural dimensions of the material properties of the plastic parts and molded plastic parts. Second, it is the choice of how to inject a reasonable machine. Choosing the right injection molding machine is the foundation of this design. Again, this is in the form of the mold structure preparation. The form structure of the mold must be calculated and a reasonable choice is based on the dimensions of the structure. The fourth step is to design the pouring system.
The fifth step is such a design in the design and mold parts of the calculation focus. The sixth step is to draw the sliding cover design of the oblique profile and the calculation of the core mechanism.

Injection Charger Base Accessories,Iphone Charger Base,Black Injection Molding,Injection Molding Machine

Timeplex Industrial Limited , https://www.timeplexhks.com