Model NO.: Concrete Mixer Truck
Drive Mode: 8x4
Maximum Horsepower: >400hp
Condition: New
Color: as Per Customer′s Option
Trademark: Sinotruk
Transport Package: Nude Packing, Polish with Wax Before Shipment
Specification: SGS
Origin: China
Model NO.: Concrete Mixer Truck
Drive Mode: 8x4
Maximum Horsepower: >400hp
Condition: New
Color: as Per Customer′s Option
Trademark: Sinotruk
Transport Package: Nude Packing, Polish with Wax Before Shipment
Specification: SGS
Origin: China
Hot-sale China SHACMAN 9T cement mixer truck for saleÂ
1.High Quality Chassis, competitive pricesÂ
2.3C ISO approved
1.High Quality Chassis, competitive pricesÂ
2.3C ISO approved
| Drive type | 6×4 |
| Cab | F3000 Lengthened Flat Roof Cab, one sleeper, A/C  |
| Transmission | 9JS119(9-forward, 1-reverse speeds )(option:9JS135/RTD-11509C) |
| Engine/Horsepower | WEICHAI , WP10.336/336/BOSCH technology    336 HP |
| Steering | ZF Technology ,Left Hand Driving(option:Right Hand) |
| Emission Standard | Euro 3 |
| Front Axle | MAN 7.5 Ton front axle |
| Rear Axle | MAN 16 Ton Double Reduction |
| Volume(m3) | 9 |
| Tyre | 11.00-20(option:12.00-20/12.00R20/80R22.5Â ) |
| Fuel Tank | 380L Metal |
1.  Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor and reducer are all made by internationally known brands and offer stable and reliable and reliable performances.
2.  Pneumatic Water Supple System. The pressure is provided by the air tank on the chassis with pressure protection devices .The Water inlet connector fits for both normal water pipe and fire fitting.
3.  Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum ,charging hopper and discharging hopper respectively ,and another flexible water outlet.
4.  Three-point Operation System. One in the cab to allow control of the agitator drum to turn forward and reverse, and to perform the "feed" ,"discharge", "agitate" and "stop" functions .Two at the rear with one operation handle at each side to perform "charge" "accelerate" ,"discharge" ,"agitate" and "stop" .Three are interlocking.
| SPECIFICATIONS | 7M³ | 9M³ | 10M³ |
| Geometric volume of drum(m³) | 11.3 | 14.91 | 16.2 |
| Mixing capacity(m³) | 7 | 9.64 | 10 |
| Material of blades/drum | Q345MN | Q345MN | B520JJ |
| Inclination angle for drum(@) | 15 | 12 | 13 |
| Padding rate(%) | 61.94% | 64.65% | 63% |
| Residual rate(%) | <0.16% | <0.16% | <1% |
| Charging speed(m³/min) | ≥3 | ≥3 | ≥3 |
| Discharging speed(m³/min) | ≥1.2 | ≥1.2 | ≥2 |
| Mixing speed(r/min) | 50-220 | 0-14 | 70-260 |
| Capacity for water tank(|) | 350 | 350 | 350 |
| Air pressure(mpa) | 0.4 | 0.4 | 0.4 |
| Max.External diameter of drum(mm) | 2118 | 2342 | 2432 |
| Length of the drum(mm) | 3868 | 4764 | 4811 |
| A Upper-fixing Length(mm) | 5930 | 6600 | 6685 |
| B Subframe Length(mm) | 5090 | 5760 | 5575 |
| C Chute Position(mm) | 840 | 840 | 850 |
| D Center of Gravity when Fully Load(mm) | 2385 | 2695 | 2750 |
| E Hopper Height(mm) | 2500 | 2570 | 2660 |
| F Upper-fixing Height(mm) | 2565 | 2635 | 2785 |
| Overall dimension(L*W*H/mm) | 5930*2490*2565 | 6600*2490*2635 | 6685*2490*2785 |
| Weight(Kg) | 3900 | 4500 | 5000 |
| Water supple | Air pressure | Air pressure | Air pressure |
If you have cooperation intention, then please send inquiries to us right now!
Â
Hot-sale China SHACMAN 9T cement mixer truck for saleÂ
1.High Quality Chassis, competitive pricesÂ
2.3C ISO approved
1.High Quality Chassis, competitive pricesÂ
2.3C ISO approved
| Drive type | 6×4 |
| Cab | F3000 Lengthened Flat Roof Cab, one sleeper, A/C  |
| Transmission | 9JS119(9-forward, 1-reverse speeds )(option:9JS135/RTD-11509C) |
| Engine/Horsepower | WEICHAI , WP10.336/336/BOSCH technology    336 HP |
| Steering | ZF Technology ,Left Hand Driving(option:Right Hand) |
| Emission Standard | Euro 3 |
| Front Axle | MAN 7.5 Ton front axle |
| Rear Axle | MAN 16 Ton Double Reduction |
| Volume(m3) | 9 |
| Tyre | 11.00-20(option:12.00-20/12.00R20/80R22.5Â ) |
| Fuel Tank | 380L Metal |
1.  Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor and reducer are all made by internationally known brands and offer stable and reliable and reliable performances.
2.  Pneumatic Water Supple System. The pressure is provided by the air tank on the chassis with pressure protection devices .The Water inlet connector fits for both normal water pipe and fire fitting.
3.  Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum ,charging hopper and discharging hopper respectively ,and another flexible water outlet.
4.  Three-point Operation System. One in the cab to allow control of the agitator drum to turn forward and reverse, and to perform the "feed" ,"discharge", "agitate" and "stop" functions .Two at the rear with one operation handle at each side to perform "charge" "accelerate" ,"discharge" ,"agitate" and "stop" .Three are interlocking.
| SPECIFICATIONS | 7M³ | 9M³ | 10M³ |
| Geometric volume of drum(m³) | 11.3 | 14.91 | 16.2 |
| Mixing capacity(m³) | 7 | 9.64 | 10 |
| Material of blades/drum | Q345MN | Q345MN | B520JJ |
| Inclination angle for drum(@) | 15 | 12 | 13 |
| Padding rate(%) | 61.94% | 64.65% | 63% |
| Residual rate(%) | <0.16% | <0.16% | <1% |
| Charging speed(m³/min) | ≥3 | ≥3 | ≥3 |
| Discharging speed(m³/min) | ≥1.2 | ≥1.2 | ≥2 |
| Mixing speed(r/min) | 50-220 | 0-14 | 70-260 |
| Capacity for water tank(|) | 350 | 350 | 350 |
| Air pressure(mpa) | 0.4 | 0.4 | 0.4 |
| Max.External diameter of drum(mm) | 2118 | 2342 | 2432 |
| Length of the drum(mm) | 3868 | 4764 | 4811 |
| A Upper-fixing Length(mm) | 5930 | 6600 | 6685 |
| B Subframe Length(mm) | 5090 | 5760 | 5575 |
| C Chute Position(mm) | 840 | 840 | 850 |
| D Center of Gravity when Fully Load(mm) | 2385 | 2695 | 2750 |
| E Hopper Height(mm) | 2500 | 2570 | 2660 |
| F Upper-fixing Height(mm) | 2565 | 2635 | 2785 |
| Overall dimension(L*W*H/mm) | 5930*2490*2565 | 6600*2490*2635 | 6685*2490*2785 |
| Weight(Kg) | 3900 | 4500 | 5000 |
| Water supple | Air pressure | Air pressure | Air pressure |
If you have cooperation intention, then please send inquiries to us right now!
Â
As a flexible aircraft, UAV has many applications in our daily life. In the military field, UAVs can carry out reconnaissance and precision strike, which can better protect the safety of combatants. In the civil field, UAVs can be used for performance, fire fighting, weather monitoring, etc. With the more and more diversified application of UAV, the requirements for UAV are more and more strict. Carbon fiber, known as the king of new materials, has excellent comprehensive performance. The UAV made of carbon fiber materials has the following advantages:
1. Lightweight: The biggest advantage of carbon fiber material is small density and light weight. Compared with metal UAVs, UAVs made of carbon fiber materials can reduce weight by about 50%, which can greatly improve the endurance of UAVs.
2. Corrosion resistance: UAVs often work in the open air, so it is necessary to have excellent corrosion resistance. Because there are many mediums in the air, they will be gradually corroded if they are in the air for a long time, and carbon fiber materials will not be affected. The carbon fiber has excellent stability, and it can remain stable even if it is immersed in acid, alkali and other corrosive liquids.
Carbon fiber materials have been recognized by the majority of users and have been applied in many fields.
Carbon Fiber UVA,UAV Accessories,UAV Carbon Fiber
Dongguan Ludi Automobile Technology Co., Ltd , https://www.ludirefitted.com