The relevant person in charge of China Automotive Research Institute said that China Automotive Research and Research is currently developing a separate collision standard for electric vehicles, and first conducted a standard study on the standard of collision. On this basis, the related research on side impact and back touch is improved, and the safety standards for electric vehicles are expected to be completed within 2 years.
Zhou Rong, chief engineer of the Automotive Standardization Research Institute of China Automotive Technology and Research Center, who participated in the standard setting, said that China is the first country in the world to set the standard for frontal collision of electric vehicles. Electric vehicles have the potential danger of high-energy power batteries, the potential hazards of voltage and high-current circuits to occupants and the dangerous situation when vehicles collide. However, the specific provisions of domestic electric vehicle safety standards are too simple, macroscopic, and operability is poor. And only limited to the requirements of frontal collisions.
It is understood that the country is doing a separate standard work on electric vehicle collisions, and has completed the national standard project and completed the collision test on dozens of electric vehicles. Zhou Rong said that the crash test will provide more data support for the safety standards of electric vehicles. At present, the safety standards for electric vehicles are being revised, especially for battery technology. China's electric vehicle frontal collision standards are aimed at pure electric vehicles, and hybrid vehicles are still applicable to the frontal collision standards of traditional vehicles. After the completion of the frontal collision standard, China will also develop the side and rear collision standards for electric vehicles.
Zhou Rong stressed that some statements about the lack of electric vehicle standards in China or just copying foreign standards are not in line with the actual situation. Up to now, China has formulated more than 40 standards related to electric vehicles, ranking the first in the world, and more than 20 of them are the first in China. In addition, more than 40 relevant standards have been incorporated into the development or research program. More than 300 electric vehicles have entered the announcement of China's automobile products, and the number is also the highest in the world.
1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
4. Adjustable lower board knife: 0-50mm.5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com