On November 5, 2013, it was learned from China Machinery Industry Federation and China Mechanical Engineering Society that Yuchai ’s 7 achievements, including the “Technology Innovation and Industrialization of Large-scale Diesel Engine Iron Wood Plastic Composite Mold,†won the 2013 China Machinery Industry Science and Technology Award. Among them, there are 3 second prizes and 4 third prizes.
The China Machinery Industry Science and Technology Award is an award set up to promote scientific and technological progress in the Chinese machinery industry. Each year, the China Machinery Industry Federation and China Mechanical Engineering Society will commend organizations and individuals that have made outstanding contributions to the advancement of science and technology in the machinery industry. In 2012, Yuchai’s two achievements were awarded, and the 2013 award-winning results soared to seven, which was a “big bumperâ€.
According to Chen Jinyuan, president of Yuchai Science and Technology Association and Yuchai Technician Association, after the two associations managed in 2013, we strengthened the management of engineers and technicians. Through the China National Machinery Research Institute and the China Machinery Manufacturing Technology Association, we learned about many national industry policies. Under the cooperation of the “Two Conferences†Office and the Process Management Office of the Manufacturing Technology Department, this time we organized and launched a large number of workers’ technicians to apply for the China Machinery Industry Science and Technology Award.
Chen Jinyuan said: “The gold content of this award is relatively high, one is wide coverage, and the other is the realization of two 'zero breakthroughs'. In 2013 the winning unit is not limited to Yuchai shares, Yuchai distribution division, Yuchai Heavy Industry have project awards. The awards cover research and development, crafts, etc. In addition, they have achieved “zero breakthroughs†in technological achievements, and “zero breakthroughs†in winning by workers' technicians. Previously, engineers and technicians won this award. Great encouragement."
Scientific and technological innovation has always been the constant pursuit of the development of enterprises. The application of the technology of “large-scale diesel engine iron-wood composite mold technology innovation and industrialization†has brought huge economic and environmental benefits to the company. According to Chi Zhaochi, one of the people who completed the project, this technology is mainly applied to large-scale diesel engines such as C300, CV100, and CK100, and has the advantages of fast tooling and low cost. From 2010-2012, the application of this technology for three years will create new profits for the company of more than 15 million yuan, saving more than 3.9 million yuan in mold costs.
Continuous Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flow-chat of Continuous Waste Plastic Pyrolysis Plant
Advantages of Continuous Waste Plastic Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Plastic Pyrolysis Plant
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Small pieces of Waste tyre,rubber, waste plastic≤5cm |
|
2 |
Operating Mode |
Fully Continuous Operation |
|
3 |
Structure |
Horizontal Type Revolve |
|
4 |
Loading and discharging |
Fully Automatic Feeding and Discharging under High Temperature at Same Time |
|
5 |
Capacity(24h) |
8-20Mt |
|
6 |
Work Pressure |
Slightly Negative Pressure |
|
7 |
Oil Yield of tyres |
40%-45% |
|
8 |
Reactor Rotational Speed |
1R/M |
|
9 |
Installation Power |
110kw |
|
10 |
Cooling Method |
Cycle water |
|
11 |
Type of Drive |
Sprocket Wheel |
|
12 |
Heating Method |
Hot Air |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Main Reactor Weight (MT) |
About 20Mt |
|
15 |
Total Weight(MT) |
About 45Mt |
|
16 |
Installation Space Required |
60m*20m |
|
17 |
Manpower |
2/shift |
|
18 |
Shipment |
5*40HC |
|
19 |
Delivery time |
≤70Days |
Continuous Waste Plastic Pyrolysis Plant
Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant
Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclingthewaste.com