X-ray security screening System
X-ray baggage/luggage scanner
X-ray Inspection System
X-ray Machine
JH-10010 X ray screening System
General Specification
Tunnel Size: 1000mm(W)*1000mm(H)
Conveyor Speed: 0.22m/s
Conveyor Max Load^^200kg
Dose per Inspection^^< 1.6μ Gy/h
Resolution^^^^^< 0.0787mm Copper Wire
Spatial resolution^^^^Level: Dia1.3mm, Vertical: Dia1.0mm
Penetrate resolution^^^Dia 0.511mm
Penetration^^^^34mm Steel
Film Safety^^^^Guarantee ISO1600 Film
X-ray Leakage^^^<0.1μ Gy/h (at a distance of 5cm From external housing)
X-ray Generator
Generate direct: Bottom to up
Generate anger: 80 degree
Anode Voltage^^^^100~160Kv
Anode power^^^^0.4 to 1.2mA
Cooling / Duty Cycle^^^Oil Cooling /100%
Image System
X-ray Sensor^^^^^^L-Shaped Photodiode Array (multi-energetic), 12bit Deep
Monitor^^^^^^^^High Resolution Color, LCD Accord, 17 inch
Image Processing^^^^Edge enhancement, image strengthening, image lightening, , reducing darkening, image returning, image retrieval.
Image Grey Level^^^^^4096
Image Max Resolution^^^1024 * 1280 pixel
Image Processing^^^^^24bit for processing real time
Image storage^^^^^Storage 60000 pictures in real time
Zones & Zoom^^^^^1-9 Image regions, 2, 4, 8, 16 Times Enlarge, Whole screen continuous observation
Multi-energetic distinguish objects ^^^^organic objects in orange, inorganic objects in blue, mixture in green
High-energy/low energy ^^^^^^^^^switch from high energy to low energy
Assist to detect drug and explosive powder
Installation Data
Operation temperature/Humidity^^ 0° C-45° C/20%-95%(non-condensing)
Storage Temperature/Humidity^^^ -20° C-60° C/20%-95%(non-condensing)
Operation Power^^^^^^^^^220VAC(± 10%)50± 3Hz
Power Consumption^^^^^^^^1.0 KW (max)
Noise: <58dB X ray screening System
X-ray security screening System
X-ray baggage/luggage scanner
X-ray Inspection System
X-ray Machine
JH-10010 X ray screening System
General Specification
Tunnel Size: 1000mm(W)*1000mm(H)
Conveyor Speed: 0.22m/s
Conveyor Max Load^^200kg
Dose per Inspection^^< 1.6μ Gy/h
Resolution^^^^^< 0.0787mm Copper Wire
Spatial resolution^^^^Level: Dia1.3mm, Vertical: Dia1.0mm
Penetrate resolution^^^Dia 0.511mm
Penetration^^^^34mm Steel
Film Safety^^^^Guarantee ISO1600 Film
X-ray Leakage^^^<0.1μ Gy/h (at a distance of 5cm From external housing)
X-ray Generator
Generate direct: Bottom to up
Generate anger: 80 degree
Anode Voltage^^^^100~160Kv
Anode power^^^^0.4 to 1.2mA
Cooling / Duty Cycle^^^Oil Cooling /100%
Image System
X-ray Sensor^^^^^^L-Shaped Photodiode Array (multi-energetic), 12bit Deep
Monitor^^^^^^^^High Resolution Color, LCD Accord, 17 inch
Image Processing^^^^Edge enhancement, image strengthening, image lightening, , reducing darkening, image returning, image retrieval.
Image Grey Level^^^^^4096
Image Max Resolution^^^1024 * 1280 pixel
Image Processing^^^^^24bit for processing real time
Image storage^^^^^Storage 60000 pictures in real time
Zones & Zoom^^^^^1-9 Image regions, 2, 4, 8, 16 Times Enlarge, Whole screen continuous observation
Multi-energetic distinguish objects ^^^^organic objects in orange, inorganic objects in blue, mixture in green
High-energy/low energy ^^^^^^^^^switch from high energy to low energy
Assist to detect drug and explosive powder
Installation Data
Operation temperature/Humidity^^ 0° C-45° C/20%-95%(non-condensing)
Storage Temperature/Humidity^^^ -20° C-60° C/20%-95%(non-condensing)
Operation Power^^^^^^^^^220VAC(± 10%)50± 3Hz
Power Consumption^^^^^^^^1.0 KW (max)
Noise: <58dB
Concrete Spun Pile Mould is a kind of Steel Mould, it is mainly apply to Concrete Spun Pile Plant to produce the Centrifugal Reinforced Technology (PHC ) Concrete Spun Pile, In order to meet customer's requirement to produce high strength PHC concrete pile, Jiangsu Haiheng Company have long term cooperation relationship with Japan spun pile factories for improve the design and technology of mould and use advanced processing equipment, HH's Spun Pile Mould has got the leader market share in the countries like Japan, Vietnam, Indonesia, Malaysia, Thailand, Myanmar, Cambodia etc.
Our Mould Advantages:
1. Mould's tongue-and-groove is designed by the dislocation of upper and lower shell boards, matchboard is plane surface. Slurry does not leak and it is easy to clean mould.
2. The tyre is "T" type forgings. Tyre and its support plate are as whole.
3. Self-developed six-meter press machine of mould inside shell. The inside shell seam extends from two meters to six meters, to minimize welds and mould strength and improve the external appearance of the products
4. Welding process uses CO2 arc shield weld which makes its appearance simple and weld seam neat. Our company cooperated with colleges to introduce [robot welding project".
5. Long lathe, manufacture the whole set mould under fifteen-meter length, greatly increases concentricity of the tyre and flange.
Spun pile Mould Specification:
|
Inside diameter(mm) |
Wheel base(mm) |
Wheel Diameter(mm) |
Length(mm) |
|
Ø300 |
2000 |
510 |
7-11 |
|
Ø350 |
2000 |
610 |
7-11 |
|
Ø400 |
2000 |
610 |
7-12 |
|
Ø450 |
2000 |
710 |
7-12 |
|
Ø500 |
2000 |
710 |
7-12 |
|
Ø550 |
2000 |
810 |
7-12 |
|
Ø600 |
2000 |
810 |
7-15 |
|
Ø800 |
2000 |
1010 |
7-15 |
|
Ø1000 |
2000 |
1210 |
7-15 |
If you have any questions, please contact with us directly. Concrete Pile Moulds are produced by High Quality and Esay transportation, quick assembling, good rigidity and smooth working. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Spun Pile Mould
Concrete Spun Pile,Reinforced Concrete Spun Pile Mould,Phc Spun Pile Mould,Pretensioned Concrete Spun Pile Mould
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com