Model NO.: 28, 32, 50, 60, 76, 90, etc
Cutter: Computerized Controlled Saw Cutter
Cooling: Water Tank
Shipment: in Hq Containers
Warranty: One Year
Trademark: Haoshuo
Transport Package: Seaworthy Packing
Specification: CE, ISO
Origin: Jiangsu, China
HS Code: 85152110
High Frequency Wedling Pipe Making Machine for Steel Pipe Production1.1 Summary:
This equipment is specially used for producingΦ 13-Φ 50.8mm(1/2'' 2''), δ 0.6-2.0mm high-frequency straight seam welded pipe and corresponding square pipe and special-shaped pipe(δ ≤ 1.5mm). The composition of equipment is from uncoiler to fixed length cutting saw. Rolling speed can be adjusted correspondingly within suitable range of pipe diameter and wall thickness.
1.2 Applicable material:
(1)Hot or cold-rolled steel strip (As per GB700-88 or GB1591-88)
(2)Material: Low-carbon steel, low alloy steelδ S≤ 345Mpa, δ B≤ 610Mpa
(3)The thickness of steel strip: 0.6-2.0mm (As per GB708-88)
(4)The width of steel strip: 40-160mm
(5)I. D. Of steel coil: Φ 450-Φ 550mm
(6)O. D. Of steel coil: Φ 800-Φ 1200mm
(7)Maximum weight coil: 1000kgs
1.3 Dimension range of processing steel pipe:
(1)O. D.: Φ 13-Φ 50.8mm(1/2'' 2'')
(2)Wall thickness: 0.6-2.0mm (square pipe and special-shaped pipeδ ≤ 1.5mm)
(3)Length: 4-8M
1.3 Milling speed: 20-90M/min
Work Flow:
Uncoiling -- shearing and butt welding -- material accumulating -- flattening forming system -- high frequency induction welding machine -- inside and outside burr removing frame -- water cooling system -- sizing system -- leveling system -- speed testing -- Turkish frame -- saw cutting -- running out table
Main components:
1 Uncoiler
2 Accumulator
3 Shearing and butt welding machine
4 Forming machine
5 Roller System of Forming
6 Seam Guide
7 High Frequency Induction Welding Machine
8 Roller System for Moving
9 Burr Removing Frame(Inside and outside)
10 Water cooling system
11 Sizing machine
12 Roller System of Leveling
13 Speed Testing Wheel
14 Turkish Frame
15 Auto flying saw controlled by Computer
16 Run-out table
17 Electric control Equipment
18High frequency welding machine
Pipe mill specs
| Machine  Model |
 Pipe Diameter |  Pipe Size |  Thickness |  Speed |  Main  Power |
 Welding  Power |
| WG-16 | Φ0.3~ Φ1.0inch (Φ8mm~Φ25mm) |
7×7mm 20×20mm |
0.3 ~ 1.2mm | 100m/Min | 22Kw | 60Kw |
| WG-25 | Φ0.3~ Φ1.2inch (Φ8mm~Φ32mm) |
7×7mm 25×25mm |
0.3 ~ 1.5mm | 90m/Min | 37Kw | 100Kw |
| WG-28 | Φ0.5~ Φ2.0inch (Φ13mm~Φ50mm) |
10×10mm 40×40mm | 0.5 ~ 1.8mm | 90m/Min | 75Kw | 100Kw |
| WG-32 | Φ0.5~ Φ2.5inch (Φ13mm~Φ63.5mm) |
10×10mm 50×50mm | 0.5 ~ 1.8mm | 90m/Min | 110Kw | 150Kw |
| WG-50 | Φ0.8~ Φ3.0inch (Φ20mm~Φ76mm) |
16×16mm 60×60mm | 0.7 ~ 3.0mm | 80m/Min | 132Kw | 200Kw |
| WG-60 | Φ1.2~ Φ4.0inch (Φ32mm~Φ102mm) |
25×25mm 80×80mm |
1.0~ 3.5mm | 70m/Min | 160Kw | 200Kw |
| WG-76 | Φ1.0~ Φ5.0inch (Φ25mm~Φ127mm) |
20×20mm 100×100mm |
1.0~ 3.5mm | 70m/Min | 185Kw | 200Kw |
| WG114 | Φ1.6~ Φ5.0inch (Φ40mm~Φ130mm) |
35×35mm 100×100mm |
1.5~ 5.0mm | 60m/Min | 160Kwx2 | 400Kw |
| WG155 | Φ2.0~ Φ6.0inch (Φ50mm~Φ155mm) |
40×40mm 120×120mm |
1.5~ 5.0mm | 60m/Min | 160Kwx2 | 400Kw |
| WG165 | Φ2.0~ Φ7.6inch (Φ50mm~Φ195mm) |
40×40mm 150×150mm |
2.0~ 6.0mm | 45m/Min | 200Kwx2 | 500Kw |
| WG219 | Φ3.5~ Φ8.60nch (Φ89mm~Φ219mm) |
70×70mm 170×170mm |
4.0~ 8.0mm | 40m/Min | 200Kwx2 | 600Kw |
| WG273 | Φ4.0~ Φ10.7nch (Φ100mm~Φ273mm) |
80×80mm 215×215mm |
4.0~ 12mm | 25m/Min | 320Kwx2 | 800Kw |
Double Layers Roll Forming Machine means the machine has two layers, up layer and down layer. So it can make two types roof panel. You can choose one layer corrugated ,one layer IBR; or two IBR;or two water wave,or one glazed and one IBR... Double deck forming machine is more suitable than two single roll forming machine. It depends on customers` demands.
Double Layers Roll Forming Machine
Double Layer Roll Forming Machine,Cnc Double Deck Roll Forming Machine,Customize Double Deck Roll Forming Machine,Hydraulic Double Deck Roll Forming Machine
Xianfa Roll Forming Machine Factory , https://www.btxianfa.com