WC67Y-63X2500 Hydraulic Press Brake and Plate Bending Machine

  • Model NO.: WC67Y-63X2500
  • Certification: ISO 9001:2000, CE
  • Suitable for: Copper, Aluminum, Alloy, Carbon Steel, Stainless Steel
  • Rated Pressure: 630kn
  • Distance Between Housing: 2000mm
  • Control System: E21 Digital Readout From Estun
  • Transport Package: No Packing
  • Origin: China
  • Condition: New
  • Automation: Semi-Automatic
  • Type: Hydraulic Bending Machine
  • Working Table Length: 2500mm
  • Machine Color: According Customer′s Requirements
  • Trademark: HAVEN
  • Specification: CE Standrad
  • HS Code: 8462
WC67Y-63X2500 Hydraulic Press Brake and Plate Bending Machine 
Hydraulic press brake main function and completed:

(1)  Steel-welded construction, vibration to eliminate stress, with high strength and good rigidity;
(2)  Hydraulic top-drive, steadiness and reliability
(3)  Mechanical stop, steel torsion bar to maintain synchronization, high precision;
(4)  Motorized-adjusting device of back-gauge and ram's stroke, fine adjusting by hand wheel, numerical display;
(5)  Deflection compensation unit installed on the top die, manual crowed bottom die holder is adopted for the machine above 250tons;
(6)  Travel limit protection.
(7)  Remote pedal control device
(8)  Full machine guarding with safety interlocker.
(9)  Duplex linked press brake is available as per client's demand.
(10) Electric components are from SIEMENS
(11) Oil-seal rings are imported from Japan
(12) NC control system are imported from DELEM, Netherland ( NC control system is at extra cost )

Main specification:
Model Normal  Pressure
  (kN)		 Length  of  table 
(mm)		 Distance  Between 
Housing  (mm)		 Throat  Depth 
(mm)		 Stroke 
(mm)		 Open  Hight
  (mm)		 Main  Motor
  (kW)		 Dimensions 
(L  x  W  x  H)  (mm)		 Weight  (t)
40/2000 400 2000 1600 200 110 335 4 2545x1510x2050 3
40/2500 400 2500 2000 200 110 335 4 2950x1510x2080 3.5
63/2000 630 2000 1600 250 110 350 5.5 2555x1600x2130 3.8
63/2500 630 2500 2000 250 110 350 5.5 2960x1600x2180 4.2
63/3200 630 3200 2600 250 110 350 5.5 3740x1600x2230 5.2
100/2500 1000 2500 2000 350 150 400 7.5 2980x1650x2330 6.3
100/3200 1000 3200 2600 350 150 400 7.5 3740x1650x2355 7
100/4000 1000 4000 3200 350 150 400 7.5 4550x1650x2450 8.8
100/5000 1000 5000 4000 350 150 400 7.5 5100x1500x2650 11.8
125/2500 1250 2500 2000 350 150 410 7.5 3980x1650x2370 7.5
125/3200 1250 3200 2600 350 150 410 7.5 3750x1650x2450 8.2
125/4000 1250 4000 3200 350 150 410 7.5 4550x1650x2470 9
125/5000 1250 5000 4000 350 150 410 7.5 5100x1500x2795 11.5
125/6000 1250 6000 4500 350 150 410 7.5 6100x1500x2895 14
160/2500 1600 2500 2000 350 150 425 11 2980x1715x2410 8.5
160/3200 1600 3200 2550 350 150 425 11 3750x1715x2450 11
160/4000 1600 4000 3200 350 190 450 11 4550x1715x2730 12
160/5000 1600 5000 4000 350 190 450 11 5100x1570x2900 15.5
160/6000 1600 6000 4500 350 190 450 11 6100x1570x3010 19
200/3200 2000 3200 2600 350 240 460 11 3750x1815x2715 13
200/4000 2000 4000 3200 350 240 460 11 4550x1815x2850 14
200/5000 2000 5000 3800 350 240 460 11 5100x1715x3020 18.5
200/6000 2000 6000 4500 350 240 460 11 6100x1715x3120 21
250/3200 2500 3200 2600 400 240 525 11 3750x2010x2850 15.5
250/4000 2500 4000 3200 400 240 525 11 4550x2010x3010 17
250/5000 2500 5000 3800 400 240 525 11 5100x1890x3190 21.5
250/6000 2500 6000 4500 400 240 525 11 6100x1890x3350 28
300/3200 3000 3200 2600 400 250 545 15 3740x2100x3235 19.5
300/4000 3000 4000 3200 400 250 545 15 4340x2100x3300 22
300/5000 3000 5000 3800 400 250 545 15 5100x2100x3430 26
300/6000 3000 6000 4500 400 250 545 15 6100x2100x3490 29

WC67Y-63X2500 Hydraulic Press Brake and Plate Bending MachineWC67Y-63X2500 Hydraulic Press Brake and Plate Bending Machine

Standard Tooling Balls

The shoulder on these Tooling Balls provides a consistent height reference point. Use the ball as a point from which any other point can be precisely measured, such as when determining hole centerlines and distances between hole centerlines.

Press-fit tooling balls install permanently.

Slip-fit tooling balls have a slightly undersized shank for temporary mounting. Secure from the side with a set screw (not included).

Tooling balls with a threaded hole secure from the bottom by threading a cap screw (not included) into the shank.

Shoulder Tooling Balls

Tooling Balls with Shoulder,reference balls,locating tooling balls

Kunshan Hongyi Tengda Mold Hardware Co.,Ltd , https://www.hdchecking.com

Posted on