TM40-B Brush Gas Air Pump

Economic Brush 12V Air Pump

Description:
TOPSFLO micro diaphragm pumps and compressors are based on a simple principal, the circular power from the motor is converted into oscillating movement by an eccentric, which moves up and down its central point, this motion is then transferred to a diaphragm by means of a connecting rod, an elastic diaphragm, which in conjunction with an inlet and outlet valve creates a pumping action.

The TM 40 Series offers multiple component configurations allowing them to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliabler, highly efficient.

TM 40 pumps can be mounted in any position and can deliver up to 11 l/min, 13L/min (dual head) depending on the model and will operate against pressures of up to 250Kpa.

Features:
Highest Performance/Size Ratio
Innovative and efficient engineering designs enable the TM 40 Series to push the performance envelope in a lightweight, compact size.
Performs Quieter
Optimized head, chamber, and flow path reduce noise without compromising performance.
Lasts Reliably Longer

Uncontaminated flow
no contamination of the media due to oil-free operation
Little vibration
Because of leading edge technologies, top quality bearing, superior brushless motor
High level of gas tightness
thanks to stress-optimised structured diaphragm, newly-designed valves and sealing systems, precise placement of the pump head
Extreme chemical resistance
The use of chemically resistant materials optional such as PTFE FKM or other ,material combinations for the parts which allows the corrosive gas to be pumped.
Optimal solution for your application
a wide standard range of materials, motors , voltages configurates multiple components system selected
 

Specification:


Typical Application:
Industrial pressure and vacuum applications
Portable Analytical Instruments
Medical Diagnostic Equipment
Air Quality Sampling Monitors
Respiration Monitors
Gas or Odor Leak Detectors  

Dimension(mm) & Curve:


Economic Brush 12V Air Pump

Description:
TOPSFLO micro diaphragm pumps and compressors are based on a simple principal, the circular power from the motor is converted into oscillating movement by an eccentric, which moves up and down its central point, this motion is then transferred to a diaphragm by means of a connecting rod, an elastic diaphragm, which in conjunction with an inlet and outlet valve creates a pumping action.

The TM 40 Series offers multiple component configurations allowing them to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliabler, highly efficient.

TM 40 pumps can be mounted in any position and can deliver up to 11 l/min, 13L/min (dual head) depending on the model and will operate against pressures of up to 250Kpa.

Features:
Highest Performance/Size Ratio
Innovative and efficient engineering designs enable the TM 40 Series to push the performance envelope in a lightweight, compact size.
Performs Quieter
Optimized head, chamber, and flow path reduce noise without compromising performance.
Lasts Reliably Longer

Uncontaminated flow
no contamination of the media due to oil-free operation
Little vibration
Because of leading edge technologies, top quality bearing, superior brushless motor
High level of gas tightness
thanks to stress-optimised structured diaphragm, newly-designed valves and sealing systems, precise placement of the pump head
Extreme chemical resistance
The use of chemically resistant materials optional such as PTFE FKM or other ,material combinations for the parts which allows the corrosive gas to be pumped.
Optimal solution for your application
a wide standard range of materials, motors , voltages configurates multiple components system selected
 

Specification:


Typical Application:
Industrial pressure and vacuum applications
Portable Analytical Instruments
Medical Diagnostic Equipment
Air Quality Sampling Monitors
Respiration Monitors
Gas or Odor Leak Detectors  

Dimension(mm) & Curve:

Industrial Pumps, refers to the pump used in industrial production.
Industrial pumps are machines that deliver or pressurizes a liquid. It transfers the mechanical energy of the prime mover or other external energy to the liquid, and increases the energy of the liquid. It is mainly used to transport liquids including water, oil, acid and alkali, emulsion, suspoemulsion and liquid metal, and also to transport liquids and gas mixtures. And a liquid containing suspended solids. The technical parameters of the pump performance include flow, suction stroke, lift, shaft power, water power, efficiency, etc.; according to different working principles, it can be divided into volume pump, vane pump and other types. The volumetric pump uses its change in the volume of the working chamber to transfer energy. The vane pump uses the interaction of the rotating blades and water to transfer energy. There are centrifugal pump, axial Flow Pump and mixed flow pump.
Pumps have different uses, different liquid media, different flow rates, and different lift ranges. Therefore, its structural form is of course different, and the materials are different. In summary, it can be roughly divided into:
1. Urban water supply 2, sewage system 3, civil engineering, building system 4, agricultural water conservancy system 5, power station system
6. Chemical system 7. Petroleum industry system 8. Mining metallurgical system 9. Light industrial system 10, ship system

Industrial Pumps

Industrial Pumps,Vertical Long Shaft Sewage Pump,Forced Circulating Pump,Circulation Dyeing Pump

Sichuan Zigong Industrial Pump Co.,Ltd. , https://www.zgpump-global.com