This year, the domestic construction machinery market is expected to increase the capacity of 8,654 units.

According to the information provided by the relevant departments, due to the increase in the entry threshold for second-hand construction machinery, in 2012 the domestic machine manufacturers are expected to increase the market capacity of 8,654 units.

In January of this year, the major domestic excavator sales companies achieved a total sales volume of 2,287 units, a year-on-year decrease of 42% and a decrease of 38.06%. Although the overall market is still weak, sales figures for some of the major companies in China have improved. Industry insiders believe that the new regulations on the use of second-hand excavators have contributed to this.

In January sales data, Shanhe Intelligence, Sany Heavy Machinery and Liugong were 130, 120, and 121 respectively, and their market share increased by 2.05, 1.12, and 2.02 percentage points respectively compared to last year. Apart from the premise that domestic enterprises have stepped up sales efforts, this subtle change has caused the market to fall into the “Circular on the Transfer of Imported Application Materials for Old Excavators” implemented on January 1 this year.

"In recent years, a large number of old machines have been used to enrich the supply of the market, and the problems exposed during use have become increasingly prominent. Especially in 2007, problems such as counterfeiting, shoddy filling, and parts replacement have occurred frequently. The machine import market was extremely turbulent, so a new notice was issued.” An engineering machinery company in Changsha admitted in an interview that if the new regulations promulgated can be strictly implemented, it is not only a norm for the used excavator import market, but also It will promote long-term sales of domestic new aircraft.

As the average price of second-hand construction machinery is only 30% to 50% of the new machine price, its imports have not stopped and its annual growth has been substantial. In the border areas of Guangdong, Hainan, and Shanghai, the used and excavated second-hand excavators can almost compete with new ones, and dealers have dubbed these areas the "Bermuda Triangle" and the "Golden Triangle" of the new aircraft. Analysts estimate that, in 2008, domestic imports of used excavators were approximately 28,000 units, accounting for 30% of total sales.

Compared with before, this acceptance standard emphasizes the review of the state of imported excavator equipment. In terms of import management of second-hand excavators, as early as 2005, relevant departments had already formulated the “Imported Acceptance Specification for Used Excavators”, which stipulated regulations on the emissions, noise, and the three-packet term of imported second-hand excavators, and improved the use of excavators. Import threshold. However, from the management notice issued by the Ministry of Commerce in 2006, these regulations did not emphasize the review of the performance of used excavators.

It is undeniable that the implementation of the second-hand excavator acceptance specification will help new domestic machine manufacturers expand market sales, but not all used excavators do not meet the acceptance criteria. From the author's understanding of research institutes and producers, they believe that the "30% substitution ratio" is a more objective assessment.

Then, if we use the 28,000 used excavator imports in 2010 as the basis for the calculation, the 30% substitutability rate means that the total domestic machine manufacturers in 2009 could increase the market capacity of 8,654 units. Based on the market share of 3.64%, 3.27% and 4.13% of excavators in Sanhe Intelligent, Liugong and Sany Heavy Machinery in 2008, it is expected that this year will bring 315, 283 and 357 sales to the above-mentioned companies.

Huang Zhen, a researcher at Changjiang Securities, said that from the announcement of the terms of the notification, the Ministry of Commerce has gradually realized that the unqualified second-hand excavators have adversely affected the domestic market and related companies, thus controlling the flow of used excavators into the country at the source. The market provides a broader market for new machine manufacturers for domestic excavator manufacturers.

Other Assistant Equipments

Steel-drawer

Model:XY-P80 XY-p120

Specification:

The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.

Steel-drawer

Advantages:

1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.

2.The automatic lifting device is adopted to reduce the labor intensity of workers;

3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.

4.Using manual automatic exchange of work,flexible choice.


Automatic Feeding Machine

Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200

Specification:

Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.

Advantages:

Fully automatic design, save time and manpower;

Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.

Automatic Feeding Machine

The Tyre Cutting Machine

Model: XY-C800 XY-C1200

Specifications:

The tyre cutting machine is applied to cut all kinds of rubber blocks and strips,it is good for cutting rubber tyre,rail tyre, rubber strips etc.

Advantages:

1.This machine with large cutting knife,good shearing effect,fast cutting speed and low energy consumption;

2.Small size, easy to move;

3.Adopt hydraulic system, easy to operate and very safe design.

Tyre Cutter




The Whole Tyre Crusher

Model: XY-SH800 / XY-SH1200

Specifications:

At the room temperature, put the tyre or large plastics of rubber into the press directly,which can be crushed into 1-8cm pieces.

Advantages:

1.Compact structure, advanced technology, low energy consumption, high efficiency;

2.The crushing chamber is an open structure,which is convenient for maintenance;

The knife is made of hard alloy steel, which has high hardness, high wear resistance and can be used repeatedly;

3.This machine adopts the hardened reducer, round screen for structural steel wire mesh, large blanking area,which is good for qualified rubber material screening.


Tyre Steel Drawer,Automatic Feeder, Assistant Equipments

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl

Posted on