Many newcomers who have just got a driver's license, driver's license according to one success, really found the parking on the road is a very difficult technical job, not to mention that some people are driving a suction truck . In addition, with the rapid growth of automobiles, parking spaces are becoming more and more nervous, and many old drivers are worried about parking, let alone newcomers. Today, we take a look at the lateral orientation of the suction truck.
Side orientation parking suction truckStopping the suction vehicle in the lateral direction firstly determines whether or not the neutral is sufficient. This requires the driver to fully understand the size of the suction vehicle. In addition, the width of the suction body is also crucial. At the time of parking, the body width we are referring to refers to the distance between the mirrors on both sides. In the scraping accidents that occur during parking, the scraping caused by the driver's incomplete understanding of the width of the vehicle occupies a large part. Finding the car is still the most important thing.
As with reversing the warehousing, the "straight-kicking" approach is also the most difficult when stopping the suction of the fecal vehicle in the lateral direction. Especially if the gap is not large enough, we will find that regardless of how you adjust the angle, the vehicle body will basically be exposed. Part of the parking space outside.
When stopping the suction of the fecal vehicle in the lateral direction, we must pay attention to the vehicle not getting too close to the vehicle, and then when the right mirror of the vehicle coincides with the B-pillar of the vehicle, the vehicle can start to stop.
For beginners, if the reversing is not skilled, the wheel speed is not fast enough. When parking in the starting side orientation, kill the enemy in the right direction and rewind slowly backwards.
When half of the car body enters the parking space and the rear vehicle headlights can be seen from the left side mirror, quickly turn the steering wheel to the left and continue to slowly reverse the car. This reminds you that the steering wheel is in a state of death for a long time and it hurts the power. We can Under the premise of not affecting the direction of movement of the vehicle, a little steering wheel is returned.
When the sideways parking is often due to lack of sense of distance and unfamiliar control of the vehicle, it causes the rear wheel to collide with the road shoulder (or scrape the wheel hub). At this time, we can adjust the slight mirror downwards for better Observe the separation between the wheels and shoulders. In the event of scratching the hub, do not hit the wheel in place. You should keep the vehicle in the original direction out of the parking space and stop again.
As far as possible, the suction truck vehicle should be straightened. The vehicle body should be as close as possible to the roadside. Afterwards, the distance between the front and rear of the vehicle should be controlled to prevent the vehicle from being blocked in the parking space. The driver can observe it in the car and can just see the front vehicle license plate. For safety car distance. At the same time, we should cooperate with reversing radar to master the rear safe distance.
The Parts of Lockstitch Bottom Hemming Machine which is easily worn out and need frequent repairment are exclusive accessories
Lockstitch Bottom Hemming Machine Parts
Lockstitch,Bottom Hemming Machine,sewing machine Parts,sewing machine
DONGGUAN CHUANGHUI SEWING MACHINE CO.,LTD , http://www.ch-sewing.com