Speed High Power Large Volume Cycloid Hydraulic Motor BMP50 Omp Series Drilling Accessories

Speed High Power Large Volume Cycloid Hydraulic Motor BMP50 Omp Series Drilling Accessories


Gerotor Hydraulics Motors BMP for Injection Moulding Machines. Models also have BMR, BMS, BMT, BMS, interchange OMS, OMT, OMR and OMP series of Donfass make, M+S Hydraulic Make, SAI and SAM Motors.
 
BMP introduction:
 
1,  Hanjiu Gerotor Hydraulic motor BMP160
Flange:
2:  2-Ø13.5Rhomb-flange, pilot Ø82.5×8
4:  4-Ø13.5Rhomb-flange, pilot Ø82.5×8
H4:  4-3/8-16 Square-flange, pilot Ø44.4×2.8
H5:  4-M10 Square-flange, pilot Ø44.4×2.8
 
Shaft:
 
A:  Shaft Ø25,parallel Key 8x7x32
C:  Shaft Ø25.4,parallel Key 6.35x6.35x31.75
E:   Shaft Ø25.4,splined tooth SAE 6B
R:  Short shaft Ø25.4,parallel key 6.35x6.35x31.75
B:  Shaft Ø32,parallel Key 10x8x45
F:  Shaft Ø31.75,splined tooth 14-DP12/24
FD:  Long shaft Ø31.75,splined tooth 14-DP12/24
G:  Shaft Ø31.75,parallel Key 7.96x7.96x31.75
T:  Cone-Shaft Ø28.56,parallel Key B5x5x14
 
Ports and Drain Port:
D:  G1/2 Manifold Mount 4-M8, G1/4
M:  M22×1.5 Manifold Mount 4-M8, M14×1.5
S:  7/8-14 O-ring manifold 4-5/16-18UNC, 7/16-20UNF
P:  1/2-14 NPTF Manifold 4-5/16-18UNC, 7/16-20UNF
R:  PT(Rc)1/2 Manifold 4-M8, PT(Rc)1/4
 
 
 
Model Crossing:
 
MOTOR CROSS REFERENCE TABLE
 
HANJIU
HYDRAULIC    M+S
HYDRAULIC    EATON
CHAR LYNN    DANFOSS    ROSS
TRW    WHITE
CROSS    PARKER    SAM
BREVINI    BOSCH
RECROTH
BMM    MM MLHK    J SERIES    OMM                   BGM    MGX
BMP/BM1    MP HP    H SERIES    OMP DH    MF MG    WP RS    TC TE TB    BG    MGP GXP
BMR/BM2    MR HR MLHRW,RW    S,T SERIES W SERIES    OMR DS OMEW    MB    WR RE    TF    BR    MGR GMR
BMH/BM4    MH MLHH HW HWF         OMH    ME    RE    TG          
BMS/BM5    MS MSY MLHS    2000 SERIES    OMS    ME    RE    TG    HPR    MGS GMS
BMT/BM6    MT MLHT MTM    6000 SERIES    OMT TMT    MJ              HT    MGT,GMT
BMV    MV MLHV    10000 SERIES    OMV                        MGV GMV
 
 
 
Main Specifications:
 
 
Main Specifications:
Technical data for BMP with 25 and 1 in and 1 in splined and 28.56 tapered shaft:
Type    BMP
BMPH
BMPW
36    BMP
BMPH
BMPW
50    BMP
BMPH
BMPW
80    BMP
BMPH
BMPW
100    BMP
BMPH
BMPW
125    BMP
BMPH
BMPW
160    BMP
BMPH
BMPW
200    BMP
BMPH
BMPW
250    BMP
BMPH
BMPW
315    BMP
BMPH
BMPW
400    BMP
BMPH
BMPW
500
Geometric displacement (cm3 /rev.)    36    51.7    77.7    96.2    120.2    157.2    194.5    240.3    314.5    389.5    486.5
Max. speed (rpm)    cont.    1500    1150    770    615    490    383    310    250    192    155    120
int.    1650    1450    960    770    615    475    385    310    240    190    150
Max. torque (N·m)    cont.    55    100    146    182    236    302    360    380    375    360    385
int.    76    128    186    227    290    370    440    460    555    525    560
peak    96    148    218    264    360    434    540    550    650    680    680
Max. output (kW)    cont.    8    10    10    11    10    10    10    8.5    7    6    5
int.    11.5    12    12    13    12    12    12    10.5    8.5    7    6
Max. pressure drop (MPa)    cont.    12.5    14    14    14    14    14    14    11    9    7    6
int.    16.5    17.5    17.5    17.5    17.5    17.5    17.5    14    14    10.5    9
peak    22.5    22.5    22.5    22.5    22.5    22.5    22.5    18    16    14    12
Max. flow (L/min)    cont.    55    60    60    60    60    60    60    60    60    60    60
int.    60    75    75    75    75    75    75    75    75    75    75
Weight (kg)    5.6    5.6    5.7    5.9    6    6.2    6.4    7    6.9    7.4    8
 
Technical data for BMP with 31.75 and 32 shaftt:
Type    BMP
BMPH
36    BMP
BMPH
50    BMP
BMPH
80    BMP
BMPH
100    BMP
BMPH
125    BMP
BMPH
160    BMP
BMPH
200    BMP
BMPH
250    BMP
BMPH
315    BMP
BMPH
400    BMP
BMPH
500
Geometric displacement (cm3 /rev.)    36    51.7    77.7    96.2    120.2    157.2    194.5    240.3    314.5    389.5    486.5
Max. speed (rpm)    cont.    1500    1150    770    615    490    383    310    250    192    155    120
int.    1650    1450    960    770    615    475    385    310    240    190    150
Max. torque (N·m)    cont.    55    100    146    182    236    302    360    460    475    490    430
int.    76    128    186    227    290    370    440    570    555    580    560
peak    96    148    218    264    360    434    540    670    840    840    780
Max. output (kW)    cont.    8    10    10    11    10    10    10    8.5    7    6    6
int.    11.5    12    12    13    12    12    12    10.5    8.5    7    7
Max. pressure drop (MPa)    cont.    12.5    14    14    14    14    14    14    14    12    9.5    7
int.    16.5    17.5    17.5    17.5    17.5    17.5    17.5    17.5    14    11.5    9
peak    22.5    22.5    22.5    22.5    22.5    22.5    22.5    22.5    22.5    18    13
Max. flow (L/min)    cont.    55    60    60    60    60    60    60    60    60    60    60
int.    60    75    75    75    75    75    75    75    75    75    75
Weight (kg)    5.6    6    5.7    5.9    6    6.2    6.4    7    6.9    7.4    8
* Continuous pressure:Max.value of operating motor continuously.
* Intermittent pressure:Max.value of operating motor in 6 seconds per minute .
* Peak pressure:Max.value of operating motor in 0.6 second per minute.
 

 
 



Product application



Shijiazhuang HanJiu technology co., LTD., is specialized in the production of BM series cycloid hydraulic motor, the BZZ redirector enterprise, my factory has dozens of high-quality, professional engineering and technical personnel, and more than in 2010, has introduced the most advanced production equipment, is in northern China's largest factories, production of more than 300000 units a year.
My factory specializes in designing and producing the motors and steering gear of any type, from large to small, from low to high, and so on. And can replace danfoss, Eaton, M+S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
My factory take the good faith first, quality first for the purpose, from the employee on-boarding, raw materials into the factory, from parts processing, assembly proposal until products, has a relatively perfect system of product quality. And through CE certification. Our factory is dedicated to the establishment of an internationally renowned brand, looking forward to the long-term cooperation with more demand of hydraulic products.




Please do not hesitate to contact us for further information, inquiries or orders.

 

Thank you for choosing 'Hanjiu' Hydraulics.

 

The manipulator is the core of the automatic welding manchinery which is composed of kinds of welding rectifier, Hanging Welding Head, Welding Turning Rolls, Welding Positioner, welding fluid feed-in and recovery system and so on. It is a whole set of welding equipment that can be used for metal pressuer vessel and metal machinery. The autoization Welding Machinery is widely used in pressure vessel, refrigeration plant, power plant, wind tower generating equipment, aviation, metallurgy industry, engineering plant, watercraft manufacture, roller resurfacing welding, petrochemical industry and so on.

CZ22-7×7 Complete Equipment of Spherical Head Welding Center

Spherical automatic welding plane is a cross Welding Machine , a set of ESAB wire submerged arc welding system, a set of ESAB with submerged arc welding system, a set of double column welding positioner.

Spherical welding center equipment mainly by the operating machine, ESAB welding system; TV monitoring system; flux feed recovery system, electrical control system, up and down tracking system, with a very surfacing institutions, water cooling system and other components.

The main technical parameters

No	Name	Details  parameters
1	Power supply	three phase,AC 380V±10%,50Hz±1
2	Vertical load	MAX 50t
3	The workpiece weighs 50 tons and supports the diameter 1600mm-6000mm	When the working conditions for the horizontal position forward 90 °, in the 50 tons load, the workpiece center of gravity from the position of the machine table plane distance of up to 1000mm
4	Artifacts eccentricity	In the 50 tons load, the workpiece center of gravity from the position of the machine table axis up to 300mm
5	Spinning speed	0,015 – 0.25 rpm
6	Rotation rate change rate	≤5%
7	Flip speed	0,01-0,15rpm
8	angle of inclination	±180°(double-seater)
9	Worktable diameter	Ф 6000mm
10	The workbench to adjust height	600mm
11	Maximum welding current	3000A
12	Maximum preheat temperature	400℃
13	continuous working hours	≥ 24h

 

We can provide the whole set welding manchinery for worldwide customers with high quality and good service, which is designed, manufactured, installed by ourselves.

Welding Machinery

Welding Machinery,Saw Welding Machine,Automatic Welding Machine,Machinery For Welding Metal

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com