Parking brakes debugging method

Barrier debugging method:

1. Adopt the all-wireless control method, which is safe and convenient, as long as you will access the 220V power supply and the shell protection grounded, you can enter the working state, to avoid the complex wiring, wiring work.

2. Adopting special balance mechanism design, the aluminum gear box is connected to make the brake lever slow to start, fast acting and slow stop, making the whole machine core low noise, fast heat dissipation, stable and durable operation, no inertia and so on.

3. The barrier has a variety of interfaces, you can access the vehicle detector (ground sense), infrared radiation and other accessories, with the requirements of barrier security, you can access the charging system to achieve automatic management (need to match )

4. Barrier lever balance adjustment method:

1 The brake has been adjusted according to the length of the bar of the barricade and the weight of the bar. The bar length and weight must not be changed without special circumstances. Otherwise, the balance must be established after professional adjustment.

2 If there is a shake when the lifting rod is encountered, adjust the spring slightly to adjust, the lever vibration is the spring force is too large to relax the spring a few times. If the lever shakes, please tighten the spring several times to the state.

3 reference spring selection table